Moxa Technologies MOXA AirWorks, AWK-1100 user manual Overview, Package Checklist, Product Features

Page 6

MOXA AirWorks AWK-1100 User’s Manual

Introduction

Overview

AWK-1100 is rated to operate at temperatures ranging from 0 to 60°C, and is rugged enough for any harsh industrial environment. It can be installed easily on DIN-Rail mounting as well as in distribution boxes. The DIN-Rail mounting capability, wide operating temperature range, and the IP30 case with LED indicators make AWK-1100 a ready, plug-and-play, yet reliable solution for your Industrial Wireless application.

Package Checklist

MOXA AWK-1100 is shipped with the following items. If any of these items is missing or damaged, please contact your customer service representative for assistance.

y1 × AWK-1100 802.11g/b Wireless AP/Bridge/Client

y2 × Swivel Type Antenna (2 dBi RP-SMA)

yQuick Installation Guide

yDocumentation & Software CD; includes User’s Manual and Windows Utility

yWarranty Booklet

Product Features

yIEEE 802.11b/g Compliant

yRedundant 24 VDC power inputs or Power-over-Ethernet

yPowerful security with WPA/802.1X/MAC address filtering

yDIN-Rail mounting capability

yCase design meets IP30 protection standard

Product Specifications

WLAN

Standards	IEEE802.11g/b for wireless LAN, IEEE802.3u 10/100BaseTX
	for Ethernet LAN, IEEE802.3af for Power over Ethernet
Frequency Range	2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)
Data Rate & Modulation	OFDM@54Mbps, CCK@11/5.5Mbps, DQPSK@2Mbps and
	DBSK@1Mbps
Operating Channels	USA: 1-11 (FCC) / Europe: 1-13 (ETSI)
Security	64-bit and 128-bit WEP encryption, WPA (IEEE
	802.1X/RADIUS and TKIP)
Data Rates	1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Transmit Power	802.11b:
	≥17dBm
	802.11g:
	6/9Mbps≥17dBm, 12/18Mbps≥15dBm,
	24Mbps≥14dBm, 36Mbps≥14dBm,
	48Mbps≥12dBm, 54Mbps≥12dBm
Receiver Sensitivity	802.11b:
	8% FER@1Mbps≤-91dBm,
	8% FER@2Mbps≤-88dBm
	8% FER@5.5Mbps≤-85dBm,
	8% FER@11Mbps≤-83dBm

1-2

Image 6

Contents Moxa AirWorks AWK-1100 User’s Manual First Edition, JulyCopyright Notice TrademarksDisclaimer Table of Contents Page Introduction Product Specifications Package ChecklistProduct Features OverviewMechanical Page ‰ Confirming the Settings of the AP and Client Computers Getting StartedFirst-Time Installation and Configuration Select the Operational Mode for AWK-1100 AP/BridgeAP Client Configure AWK-1100’s Ieee 802.11 settings Review and Apply SettingsDeploying the Access Point AP Setting up Client ComputersConfiguring Ieee 802.11g-related Settings Confirming the Settings of the AP and Client Computers Configuring TCP/IP-related SettingsChecking if the Ieee 802.11g-related Settings Work Checking if the TCP/IP-related Settings Work To check if a client computer can assess the InternetPage Web Console Configuration ‰ Viewing StatusMenu Structure Save, Save & Restart, and Cancel Buttons Home and Refresh ButtonsCurrent Dhcp Mappings Associated Wireless ClientsViewing Status System LogGeneral Operations Link Monitor AP Client mode onlySpecifying the Operational Mode STA-APUpgrading Firmware by Http Administrative PasswordManaging the Firmware AP/Bridge AP ClientBacking up and Restoring Configuration Settings by Http Upgrading Firmware by TftpChoose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Configuring TCP/IP-related Settings Resetting the Configuration to Factory DefaultsAddressing Dhcp Server AP/Bridge modes only BasicStatic Dhcp Mappings Configuring Ieee 802.11g-related Settings CommunicationLink Integrity Wireless Distribution System Association ControlAP Load Balancing Sample wireless bridge network topology Security STA Shared Key , and Auto MAC-Address-Based Access Control Set the Access control type to exclusiveSet the Access control type to inclusive Ieee 802.1X/RADIUS AP mode only Click DownloadInternet Ethernet Type Filters Configuring Advanced SettingsPacket Filters IP Protocol FiltersUPnP ManagementTCP/UDP Port Filters System LogSnmp Page Default Settings Snmp read community LAN InterfaceManagement Snmp write communityTroubleshooting Wireless Settings ProblemsWireless client computer cannot associate with an AWK-1100 TCP/IP Settings Problems AP does not respond to ping from the client computerUnknown Problems Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Federal Communication Commission Interference StatementTTE Compliance Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Moxa Internet Services Following services are providedProblem Report Form Moxa Product † AWK-1100-US † AWK-1100-EU Serial NumberProduct Return Procedure