Moxa Technologies MOXA AirWorks, AWK-1100 user manual MAC-Address-Based Access Control

Page 34

MOXA AirWorks AWK-1100 User’s Manual

Web Console Configuration

MAC-Address-Based Access Control

With MAC-Address-Based Access Control, you can specify the wireless client computers that are permitted or not permitted to associate with the AWK-1100. When the table type is set to inclusive, entries in the table are permitted to associate with the AWK-1100. When the table type is set to exclusive, entries in the table are not permitted to associate with the AWK-1100.

To deny access for wireless clients to the wireless network:

1.Select Enabled from the Functionality drop-down list.

2.Set the Access control type to exclusive.

3.Specify the MAC address of a wireless client to be denied access, and then click Add.

4.Repeat Steps 3 for other wireless clients.

To grant access for wireless clients to the wireless network:

1.Select Enabled from the Functionality drop-down list.

2.Set the Access control type to inclusive.

3.Specify the MAC address of a wireless client to be denied access, and then click Add.

4.Repeat Steps 3 for other wireless clients.

To delete an entry in the access control table:

yClick Delete next to the entry.

NOTE	The size of the access control table is 64.

Instead of manually entering MAC addresses to the access control table one by one, you can prepare a text file that contains all the MAC addresses and put it on a TFTP server, and then command the AWK-1100 to download the MAC ACL (Access Control List) file from the TFTP server. The following figure shows the contents of a sample ACL file.

3-18

Image 34

Contents Moxa AirWorks AWK-1100 User’s Manual First Edition, JulyTrademarks Copyright NoticeDisclaimer Table of Contents Page Introduction Product Specifications Package ChecklistProduct Features OverviewMechanical Page ‰ Confirming the Settings of the AP and Client Computers Getting StartedFirst-Time Installation and Configuration AP/Bridge Select the Operational Mode for AWK-1100AP Client Configure AWK-1100’s Ieee 802.11 settings Review and Apply SettingsSetting up Client Computers Deploying the Access Point APConfiguring Ieee 802.11g-related Settings Configuring TCP/IP-related Settings Confirming the Settings of the AP and Client ComputersChecking if the Ieee 802.11g-related Settings Work Checking if the TCP/IP-related Settings Work To check if a client computer can assess the InternetPage Web Console Configuration ‰ Viewing StatusMenu Structure Save, Save & Restart, and Cancel Buttons Home and Refresh ButtonsCurrent Dhcp Mappings Associated Wireless ClientsViewing Status System LogGeneral Operations Link Monitor AP Client mode onlySpecifying the Operational Mode STA-APUpgrading Firmware by Http Administrative PasswordManaging the Firmware AP/Bridge AP ClientBacking up and Restoring Configuration Settings by Http Upgrading Firmware by TftpChoose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Resetting the Configuration to Factory Defaults Configuring TCP/IP-related SettingsAddressing Basic Dhcp Server AP/Bridge modes onlyStatic Dhcp Mappings Communication Configuring Ieee 802.11g-related SettingsLink Integrity Association Control Wireless Distribution SystemAP Load Balancing Sample wireless bridge network topology Security STA Shared Key , and Auto Set the Access control type to exclusive MAC-Address-Based Access ControlSet the Access control type to inclusive Ieee 802.1X/RADIUS AP mode only Click DownloadInternet Ethernet Type Filters Configuring Advanced SettingsPacket Filters IP Protocol FiltersUPnP ManagementTCP/UDP Port Filters System LogSnmp Page Default Settings Snmp read community LAN InterfaceManagement Snmp write communityWireless Settings Problems TroubleshootingWireless client computer cannot associate with an AWK-1100 TCP/IP Settings Problems AP does not respond to ping from the client computerUnknown Problems Moxa AirWorks AWK-1100 User’s Manual Federal Communication Commission Interference Statement Regulatory StatementTTE Compliance Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Moxa Internet Services Following services are providedProblem Report Form Moxa Product † AWK-1100-US † AWK-1100-EU Serial NumberProduct Return Procedure