Moxa Technologies AWK-1100, MOXA AirWorks user manual Getting Started

Page 9

2

Getting Started

This chapter explains how to install MOXA AirWorks AWK-1100 for the first time. The following topics are covered:

First-Time Installation and Configuration

Deploying the Access Point (AP)

Setting up Client Computers

¾Configuring IEEE 802.11g-related Settings

¾Configuring TCP/IP-related Settings

Confirming the Settings of the AP and Client Computers

¾Checking if the IEEE 802.11g-related Settings Work

¾Checking if the TCP/IP-related Settings Work

Image 9

Contents First Edition, July Moxa AirWorks AWK-1100 User’s ManualCopyright Notice TrademarksDisclaimer Table of Contents Page Introduction Product Features Package ChecklistProduct Specifications OverviewMechanical Page Getting Started ‰ Confirming the Settings of the AP and Client ComputersFirst-Time Installation and Configuration Select the Operational Mode for AWK-1100 AP/BridgeAP Client Review and Apply Settings Configure AWK-1100’s Ieee 802.11 settingsDeploying the Access Point AP Setting up Client ComputersConfiguring Ieee 802.11g-related Settings Confirming the Settings of the AP and Client Computers Configuring TCP/IP-related SettingsChecking if the Ieee 802.11g-related Settings Work To check if a client computer can assess the Internet Checking if the TCP/IP-related Settings WorkPage ‰ Viewing Status Web Console ConfigurationMenu Structure Home and Refresh Buttons Save, Save & Restart, and Cancel ButtonsViewing Status Associated Wireless ClientsCurrent Dhcp Mappings System LogSpecifying the Operational Mode Link Monitor AP Client mode onlyGeneral Operations STA-APManaging the Firmware Administrative PasswordUpgrading Firmware by Http AP/Bridge AP ClientUpgrading Firmware by Tftp Backing up and Restoring Configuration Settings by HttpChoose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Configuring TCP/IP-related Settings Resetting the Configuration to Factory DefaultsAddressing Dhcp Server AP/Bridge modes only BasicStatic Dhcp Mappings Configuring Ieee 802.11g-related Settings CommunicationLink Integrity Wireless Distribution System Association ControlAP Load Balancing Sample wireless bridge network topology Security STA Shared Key , and Auto MAC-Address-Based Access Control Set the Access control type to exclusiveSet the Access control type to inclusive Click Download Ieee 802.1X/RADIUS AP mode onlyInternet Packet Filters Configuring Advanced SettingsEthernet Type Filters IP Protocol FiltersTCP/UDP Port Filters ManagementUPnP System LogSnmp Page Default Settings Management LAN InterfaceSnmp read community Snmp write communityTroubleshooting Wireless Settings ProblemsWireless client computer cannot associate with an AWK-1100 AP does not respond to ping from the client computer TCP/IP Settings ProblemsUnknown Problems Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Federal Communication Commission Interference StatementTTE Compliance Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Following services are provided Moxa Internet ServicesMoxa Product † AWK-1100-US † AWK-1100-EU Serial Number Problem Report FormProduct Return Procedure