Moxa Technologies AWK-1100 Configuring Advanced Settings, Packet Filters, Ethernet Type Filters

Page 37

MOXA AirWorks AWK-1100 User’s Manual

Web Console Configuration

Configuring Advanced Settings

Packet Filters

The AWK-1100 provides layer 2 (Ethernet Type Filters), layer 3 (IP Protocol Filters), and layer 4 (TCP/UDP Port Filters) filtering capabilities. The configuration processes for the filters are similar.

yFunctionality: whether this filtering capability is enabled or disabled.

yPolicy for matched packets: how a matched packet is processed—discardor pass.

yTo enable a filtering rule: select the check box to the left of the rule.

Ethernet Type Filters

The filed Ethernet type of the MAC (Media Access Control) header of a packet incoming from the WLAN or Ethernet interface is inspected for filtering. As a rule, specify the hex-decimal Ethernet type number and give the rule a name.

IP Protocol Filters

The protocol, source address, and destination address fields of a packet incoming from the WLAN or Ethernet interface is inspected for filtering. As a rule, specify the hex-decimal protocol number, source IP address range (Source IP Address AND Source Subnet Mask), and destination IP address range (Destination IP Address AND Destination Subnet Mask).

A source/destination IP address range is determined by performing an AND operation on the source/destination IP address field and the source/destination subnet mask field. For example, if the source IP address field is 192.168.127.253 and the source subnet mask field is 255.255.255.0, the resultant source IP address range is 192.168.127.0 to 192.168.127.255.

3-21

Image 37

Contents First Edition, July Moxa AirWorks AWK-1100 User’s ManualTrademarks Copyright NoticeDisclaimer Table of Contents Page Introduction Product Features Package ChecklistProduct Specifications OverviewMechanical Page Getting Started ‰ Confirming the Settings of the AP and Client ComputersFirst-Time Installation and Configuration AP/Bridge Select the Operational Mode for AWK-1100AP Client Review and Apply Settings Configure AWK-1100’s Ieee 802.11 settingsSetting up Client Computers Deploying the Access Point APConfiguring Ieee 802.11g-related Settings Configuring TCP/IP-related Settings Confirming the Settings of the AP and Client ComputersChecking if the Ieee 802.11g-related Settings Work To check if a client computer can assess the Internet Checking if the TCP/IP-related Settings WorkPage ‰ Viewing Status Web Console ConfigurationMenu Structure Home and Refresh Buttons Save, Save & Restart, and Cancel ButtonsViewing Status Associated Wireless ClientsCurrent Dhcp Mappings System LogSpecifying the Operational Mode Link Monitor AP Client mode onlyGeneral Operations STA-APManaging the Firmware Administrative PasswordUpgrading Firmware by Http AP/Bridge AP ClientUpgrading Firmware by Tftp Backing up and Restoring Configuration Settings by HttpChoose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Resetting the Configuration to Factory Defaults Configuring TCP/IP-related SettingsAddressing Basic Dhcp Server AP/Bridge modes onlyStatic Dhcp Mappings Communication Configuring Ieee 802.11g-related SettingsLink Integrity Association Control Wireless Distribution SystemAP Load Balancing Sample wireless bridge network topology Security STA Shared Key , and Auto Set the Access control type to exclusive MAC-Address-Based Access ControlSet the Access control type to inclusive Click Download Ieee 802.1X/RADIUS AP mode onlyInternet Packet Filters Configuring Advanced SettingsEthernet Type Filters IP Protocol FiltersTCP/UDP Port Filters ManagementUPnP System LogSnmp Page Default Settings Management LAN InterfaceSnmp read community Snmp write communityWireless Settings Problems TroubleshootingWireless client computer cannot associate with an AWK-1100 AP does not respond to ping from the client computer TCP/IP Settings ProblemsUnknown Problems Moxa AirWorks AWK-1100 User’s Manual Federal Communication Commission Interference Statement Regulatory StatementTTE Compliance Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Following services are provided Moxa Internet ServicesMoxa Product † AWK-1100-US † AWK-1100-EU Serial Number Problem Report FormProduct Return Procedure