Moxa Technologies AWK-1100, MOXA AirWorks user manual Mechanical

Page 7

MOXA AirWorks AWK-1100 User’s Manual			Introduction
		802.11g:
		10% PER@6Mbps≤-88dBm,
		10% PER@9Mbps≤-87dBm
		10% PER@12Mbps≤-84dBm,
		10% PER@18Mbps≤-82dBm
		10% PER@24Mbps≤-79dBm,
		10% PER@36Mbps≤-75dBm
		10% PER@48Mbps≤-69dBm,
		10% PER@54Mbps≤-68dBm
	Software Features
	Protocols	HTTP, DHCP, TCP/IP, RADIUS, DNS, NetBIOS, NetBEUI,
		AppleTalk, and IPX/SPX
	Configuration	Web-based management
	Client OS Support	Windows 95/98/2000/ME/NT/XP, Unix and Macintosh

	Interface
	Antenna	2dBi diversity antenna with an R-SMA connector
	RJ45 port	10/100BaseT(X) auto negotiation speed
	LED Indicators	PWR1, PWR2, WLAN (Link/ACT), LAN (Link/ACT)

	Power
	Input Voltage	12 to 45 VDC; Redundant dual DC power inputs or Power over
		Ethernet (PoE, power on RJ45 pins 4, 5 for power + and pins 7, 8
		for power -)
	Input Current (@24V)	0.3A
	Connection	Removable Terminal Block
	Overload Current Protection	1.6A
	Reverse Polarity Protection	Present

	Mechanical
	Casing	IP30 protection, aluminum case
	Installation	DIN-Rail or panel mounting

	Environmental
	Operating Temperature	0 to 60°C (32 to 140°F)
	Storage Temperature	-20 to 70°C (-4 to 158°F)
	Ambient Relative Humidity	5 to 95% (non-condensing)

	Regulatory Approvals
	Safety	UL, TÜV
	Emissions	FCC, CE, SRRC
	WARRANTY	5 years

1-3

Image 7

Contents First Edition, July Moxa AirWorks AWK-1100 User’s ManualTrademarks Copyright NoticeDisclaimer Table of Contents Page Introduction Overview Package ChecklistProduct Features Product SpecificationsMechanical Page Getting Started ‰ Confirming the Settings of the AP and Client ComputersFirst-Time Installation and Configuration AP/Bridge Select the Operational Mode for AWK-1100AP Client Review and Apply Settings Configure AWK-1100’s Ieee 802.11 settingsSetting up Client Computers Deploying the Access Point APConfiguring Ieee 802.11g-related Settings Configuring TCP/IP-related Settings Confirming the Settings of the AP and Client ComputersChecking if the Ieee 802.11g-related Settings Work To check if a client computer can assess the Internet Checking if the TCP/IP-related Settings WorkPage ‰ Viewing Status Web Console ConfigurationMenu Structure Home and Refresh Buttons Save, Save & Restart, and Cancel ButtonsSystem Log Associated Wireless ClientsViewing Status Current Dhcp MappingsSTA-AP Link Monitor AP Client mode onlySpecifying the Operational Mode General OperationsAP/Bridge AP Client Administrative PasswordManaging the Firmware Upgrading Firmware by HttpUpgrading Firmware by Tftp Backing up and Restoring Configuration Settings by HttpChoose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Resetting the Configuration to Factory Defaults Configuring TCP/IP-related SettingsAddressing Basic Dhcp Server AP/Bridge modes onlyStatic Dhcp Mappings Communication Configuring Ieee 802.11g-related SettingsLink Integrity Association Control Wireless Distribution SystemAP Load Balancing Sample wireless bridge network topology Security STA Shared Key , and Auto Set the Access control type to exclusive MAC-Address-Based Access ControlSet the Access control type to inclusive Click Download Ieee 802.1X/RADIUS AP mode onlyInternet IP Protocol Filters Configuring Advanced SettingsPacket Filters Ethernet Type FiltersSystem Log ManagementTCP/UDP Port Filters UPnPSnmp Page Default Settings Snmp write community LAN InterfaceManagement Snmp read communityWireless Settings Problems TroubleshootingWireless client computer cannot associate with an AWK-1100 AP does not respond to ping from the client computer TCP/IP Settings ProblemsUnknown Problems Moxa AirWorks AWK-1100 User’s Manual Federal Communication Commission Interference Statement Regulatory StatementTTE Compliance Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Following services are provided Moxa Internet ServicesMoxa Product † AWK-1100-US † AWK-1100-EU Serial Number Problem Report FormProduct Return Procedure