3.6 IP TX
Figure 16 shows the IP TX page. The purpose of this page is to provide an interface for configuring the different streams to be sent through the unit.
Figure 16. IP TX page
The left part of screen shows a three containing all the DVB ASI input ports. To select a port, click that port. The information to the right of the page shows the IP transmission parameters for the selected port.
3.6.1 Main
The IP TX main
1.1.1.23 Input Configuration
Enable input: Tick this box to enable an input. If this is not ticked, you will not receive any
Input name: Enter a name reference to an ASI input stream.
Max bitrate: Enter the maximum bitrate the ASI input stream is allowed to use. If the ASI input stream exceeds this bitrate, some data in this stream is discarded to keep its bitrate lower than the maximum bitrate setting. This prevents, when set correctly, one ASI stream from maxing out the IP channel, and thus disrupting all streams present on the IP channel. The sum of ‘Max bitrate’ for all active channels should not exceed the IP channel bandwidth.
Page 39