Patton electronic Model 3088/I manual Saving the configuration, Reset for Factory Default, Console

Page 38

3088/I Getting Started Guide

6 • System Management

 

 

Saving the configuration

To save all configuration changes into non-volatile memory, click on the hyperlink Save Configuration in the System Management menu item. Click on the Save button and wait until you see the message that verifies the save was executed properly.

Figure 21. Saving the configuration to non-volatile memory

Reset for Factory Default

To recover from a forgotten password, the user may reset the unit to its factory configuration. Click on the Reset hyperlink in the System Management menu. If you want to reset to factory default settings, check the box for that function. (See figure 22.) Click on the Restart button. Wait until the 3088/I has completely restarted before doing anything. At this point, you should return to the console port since the IP address also returns to its default setting. (See the next section.)

Figure 22. Resetting the 3088/I to factory default

Console

The 3088/I offers a console command line interface. The terminal emulator should be configured to 9600 bps/ 1 stop bit/ no parity/ XON-XOFF flow control. This is typically used when doing the initial configuration of the IP address and subnet mask. (See also “Configure the IP address” on page 18.)

Saving the configuration

38

Image 38
Contents RocketLink-G G.SHDSL NTU Mailsupport@patton.com Summary Table of Contents Table of Contents Installation & operation Factory replacement parts and accessories RS-232 console interface pin assignments List of Figures List of Tables Structure About this guideAudience Precautions Impaired functioningSafety when working with electricity General observationsTypographical conventions used in this document General conventionsChapter contents General informationFeatures RocketLink-G 3088/I overviewInitial configuration DC power-up Power up the NTUAC power-up IntroductionConnect a PC and log Power-up indicationConfigure the IP address Modify the IP address Connect to the local IP networkLog onto the web management interface Connect the G.SHDSL portRear view of 3088/I showing DSL RJ-11 jack Shdsl config and status DSL configuration DSL ParametersDSL Error Monitor Configuration DSL Error Monitor ConfigurationShdsl Status Run-Time StatisticsDSL Line Error Counters Local Interface Error CountersClearing Error Counters Clearing the error countersEthernet & WAN PPP Config and status Ethernet port configuration IP configurationPPP configuration Ethernet Basic Port AttributesEthernet Advanced Port Attributes Ethernet performance statisticsConfigurable Ethernet parameters Installation & operation Connecting the twisted-pair interface InstallationPower-up OperationWAN LEDs LED status indicatorsPower Yellow Ethernet LEDs 100M YellowSystem Management RocketLink-G Plug ‘n’ Play 3088Console Reset for Factory DefaultSaving the configuration Authentication Backing up and restoring saved configurationsSystem Software Upgrade Upgrading software on the 3088/IDiagnostic tools Ping & Traceroute System tools for testingLED status monitor & definition Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information Out-of-warranty service RMA numbersAppendix a Compliance information FCC Part 68 Acta Statement SafetyCompliance Radio and TV Interference FCC PartAuthorized European Representative Industry Canada NoticeCE Declaration of Conformity Appendix B Specifications Ethernet General characteristicsShdsl characteristics Protocol supportManagement Serial connectorDiagnostics 10Base-T/100Base-TX interfaceEthernet 100M PowerVDC power supply Ethernet TxEnvironment DimensionsLine Interface Shdsl Physical connection & Transmission LineAppendix C Factory replacement parts and accessories Factory replacement parts and accessories Model # DescriptionAppendix D RJ-11 non-shielded DSL port RJ-11 non-shielded DSL port Appendix E RJ-45 shielded 10/100 Ethernet port RJ-45 shielded 10/100 Ethernet port Appendix F RS-232 console interface Pin assignments RJ-45 non-shielded Connector EIA-561 RS-232 console interface pin assignments