Patton electronic Model 3088/I manual LED status monitor & definition, System tools for testing

Page 42

3088/I Getting Started Guide

7 • Diagnostic tools

 

 

LED status monitor & definition

See LED status indicators in “LED status indicators” on page 34.

System tools for testing

Testing and troubleshooting can utilize a broad range of tools. Various types of tools are a part of the 3088/I capabilities, from observing the LED’s status, tracking the error counters, and using network tools which are described in this section.

Ping & Traceroute

Ping and Traceroute are familiar to all IP network users. Go to the Tools hyperlink under System Management in the Configuration Menu. You will find both Ping and Traceroute tools available. Enter the IP address that you want to ping or traceroute. Click on the appropriate button to invoke the desired test.

Figure 27. Ping and Traceroute

Clearing error counters

The error counters may be cleared in the Configuration web page or here in the Status web page. Select Clear All Counters and click on the Submit button.

Figure 28. Clearing Error Counters

LED status monitor & definition

42

Image 42
Contents RocketLink-G G.SHDSL NTU Mailsupport@patton.com Summary Table of Contents Table of Contents Installation & operation Factory replacement parts and accessories RS-232 console interface pin assignments List of Figures List of Tables About this guide AudienceStructure Precautions Impaired functioningSafety when working with electricity General observationsTypographical conventions used in this document General conventionsChapter contents General informationFeatures RocketLink-G 3088/I overviewInitial configuration DC power-up Power up the NTUAC power-up IntroductionPower-up indication Configure the IP addressConnect a PC and log Modify the IP address Connect to the local IP networkLog onto the web management interface Connect the G.SHDSL portRear view of 3088/I showing DSL RJ-11 jack Shdsl config and status DSL configuration DSL ParametersDSL Error Monitor Configuration DSL Error Monitor ConfigurationShdsl Status Run-Time StatisticsDSL Line Error Counters Local Interface Error CountersClearing Error Counters Clearing the error countersEthernet & WAN PPP Config and status Ethernet port configuration IP configurationPPP configuration Ethernet Basic Port AttributesEthernet Advanced Port Attributes Ethernet performance statisticsConfigurable Ethernet parameters Installation & operation Connecting the twisted-pair interface InstallationPower-up OperationLED status indicators Power YellowWAN LEDs Ethernet LEDs 100M YellowSystem Management RocketLink-G Plug ‘n’ Play 3088Reset for Factory Default Saving the configurationConsole Authentication Backing up and restoring saved configurationsSystem Software Upgrade Upgrading software on the 3088/IDiagnostic tools System tools for testing LED status monitor & definitionPing & Traceroute Contacting Patton for assistance Warranty coverage Contact informationPatton support headquarters in the USA Out-of-warranty service RMA numbersAppendix a Compliance information FCC Part 68 Acta Statement SafetyCompliance Radio and TV Interference FCC PartIndustry Canada Notice CE Declaration of ConformityAuthorized European Representative Appendix B Specifications Ethernet General characteristicsShdsl characteristics Protocol supportManagement Serial connectorDiagnostics 10Base-T/100Base-TX interfaceEthernet 100M PowerVDC power supply Ethernet TxEnvironment DimensionsLine Interface Shdsl Physical connection & Transmission LineAppendix C Factory replacement parts and accessories Factory replacement parts and accessories Model # DescriptionAppendix D RJ-11 non-shielded DSL port RJ-11 non-shielded DSL port Appendix E RJ-45 shielded 10/100 Ethernet port RJ-45 shielded 10/100 Ethernet port Appendix F RS-232 console interface Pin assignments RJ-45 non-shielded Connector EIA-561 RS-232 console interface pin assignments