Patton electronic Model 3088/I manual Management, 10Base-T/100Base-TX interface, Serial connector

Page 51

3088/I Getting Started Guide	B • Specifications

Management

•Web-based conﬁguration via embedded web server

•CLI menu for conﬁguration, management, and diagnostics

•Local (VT-100 or Telnet)

•Console port set at 9600 bps, 8 bits, no parity, 1 stop bit, no ﬂow control

10Base-T/100Base-TX interface

The Ethernet port is a shielded RJ-45 jack, autonegotiate, full- or half-duplex with an MDI-X switch. See Appendix E, “RJ-45 shielded 10/100 Ethernet port” on page 58 for the pinout.

Serial connector

The console port is an RS-232 interface (EIA-561) on an RJ-45 jack. See Appendix F, “RS-232 console inter- face pin assignments” on page 60 for the pinout.

Diagnostics

Various diagnostic features are integrated into the 3088/I NTU. Ping and Traceroute facilities. DSL run-time statistics, DSL line error counters, Local interface error counters, Bridged PPP statistics, Ethernet port statis- tics, and front panel status LEDs (see section“Status LEDs”.)

Status LEDs

Power

The Power LED glows solid during normal operation. At startup, during the POST, the LED blinks once every second. If the POST fails, the unit does not enter normal operation, and the LED blinks once every 0.4 seconds.

WAN Link

The DSL LED glows solid while a DSL link is established. While the DSL link is training it blinks once every second.

WAN Tx

The DSL LED glows solid while a DSL link is established. While the DSL link is training it blinks once every second.

WAN Rx

The DSL LED glows solid while a DSL link is established. While the DSL link is training it blinks once every second.

Ethernet Link

The DSL LED glows solid while a DSL link is established. While the DSL link is training it blinks once every second.

Management

51

Image 51

Contents RocketLink-G G.SHDSL NTU Mailsupport@patton.com Summary Table of Contents Table of Contents Installation & operation Factory replacement parts and accessories RS-232 console interface pin assignments List of Figures List of Tables About this guide AudienceStructure Impaired functioning PrecautionsGeneral observations Safety when working with electricityGeneral conventions Typographical conventions used in this documentGeneral information Chapter contentsRocketLink-G 3088/I overview FeaturesInitial conﬁguration Introduction Power up the NTUAC power-up DC power-upPower-up indication Conﬁgure the IP addressConnect a PC and log Connect to the local IP network Modify the IP addressConnect the G.SHDSL port Log onto the web management interfaceRear view of 3088/I showing DSL RJ-11 jack Shdsl conﬁg and status DSL Parameters DSL conﬁgurationDSL Error Monitor Conﬁguration DSL Error Monitor ConﬁgurationRun-Time Statistics Shdsl StatusLocal Interface Error Counters DSL Line Error CountersClearing the error counters Clearing Error CountersEthernet & WAN PPP Conﬁg and status Ethernet Basic Port Attributes IP conﬁgurationPPP conﬁguration Ethernet port conﬁgurationEthernet performance statistics Ethernet Advanced Port AttributesConﬁgurable Ethernet parameters Installation & operation Operation InstallationPower-up Connecting the twisted-pair interfaceLED status indicators Power YellowWAN LEDs 100M Yellow Ethernet LEDsSystem Management 3088 RocketLink-G Plug ‘n’ PlayReset for Factory Default Saving the conﬁgurationConsole Backing up and restoring saved conﬁgurations AuthenticationUpgrading software on the 3088/I System Software UpgradeDiagnostic tools System tools for testing LED status monitor & deﬁnitionPing & Traceroute Contacting Patton for assistance Warranty coverage Contact informationPatton support headquarters in the USA RMA numbers Out-of-warranty serviceAppendix a Compliance information Radio and TV Interference FCC Part SafetyCompliance FCC Part 68 Acta StatementIndustry Canada Notice CE Declaration of ConformityAuthorized European Representative Appendix B Speciﬁcations Protocol support General characteristicsShdsl characteristics Ethernet10Base-T/100Base-TX interface Serial connectorDiagnostics ManagementEthernet Tx PowerVDC power supply Ethernet 100MShdsl Physical connection & Transmission Line DimensionsLine Interface EnvironmentAppendix C Factory replacement parts and accessories Model # Description Factory replacement parts and accessoriesAppendix D RJ-11 non-shielded DSL port RJ-11 non-shielded DSL port Appendix E RJ-45 shielded 10/100 Ethernet port RJ-45 shielded 10/100 Ethernet port Appendix F RS-232 console interface Pin assignments RS-232 console interface pin assignments RJ-45 non-shielded Connector EIA-561