Polycom 1 Setting Description Preferred Dialing, Method, Call Preference, Video Dialing, Order

Networks

To make the enabled call types available on the Place a Call screen, you must enable the Call Quality setting described on page 7-4.

3. Select and configure these settings on the Network Dialing screen:

Setting	Description
Preferred Dialing	Specifies the preferred method for dialing various call types. If
Method	set to Auto, calls use the configured Dialing Order. If set to
	Manual, the system prompts the user to select the call type
	from a list when placing a call.
Call Preference	Specifies whether the Polycom HDX system uses the Video
	Dialing Order or the Audio Dialing Order first when placing
	calls.
Video Dialing	Specifies how the system places video calls to directory
Order	entries that have both IP and ISDN numbers. It also specifies
	how the system places video calls dialed manually, when the
	call type selection is either unavailable on the home screen or
	set to Auto. If a call attempt does not connect, the system
	tries to place the call using the next call type in the list.
	This setting is available only when Preferred Dialing Method
	is set to Auto.
	For more information, refer to Configuring Dialing Order
	Settings on page 2-27.
Audio Dialing	Specifies how the system places audio calls to directory
Order	entries that have more than one type of number. It also
	specifies how the system places audio calls dialed manually,
	when the call type selection is either unavailable on the home
	screen or set to Auto. If a call attempt does not connect, the
	system tries to place the call using the next call type in the
	list.
	This setting is available only when Preferred Dialing Method
	is set to Auto.
	For more information, refer to Configuring Dialing Order
	Settings on page 2-27.

2 - 25