TP-Link manual TL-PA4010 AV500 Nano Powerline Adapter,  Note

Contents TL-PA4010 AV500 Nano Powerline Adapter Rev 1.0.0COPYRIGHT & TRADEMARKS CE Mark Warning Safety InformationFCC STATEMENT This product can be used in the following countries Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITYProduct Description AV500 Nano Powerline Adapter EN EN EN 61000-3-22006+A12009+A22009 EN ENChapter 4 Using the Management Utility CONTENTSPackage Contents Appendix A Troubleshooting Note Package ContentsTL-PA4010 AV500 Nano Powerline Adapter 1.1 Conventions Chapter 1 Introduction1.3 Important Safety Instructions 1.2 System Requirement If liquid has been spilled on the product 2.1 Introduction Chapter 2 Connecting Mechanism2.2 LED Indicator StatusDescription 2.3 Physical InterfaceInterface 2.4 Connection Instruction 2.5 Hardware Connection - Computer2.6 Hardware Connection - Internet TL-PA4010 AV500 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status4.1.1 Set Local Device’s Network Name 4.2 Network 4.2.2 Add Device 4.2.1 Rename the Remote Device/Enter PasswordPassword is unnecessary to enter for renaming 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware  Note To upgrade the devices firmware, follow these instructions4.4.2 Reset Device 4.4.3 Set All Devices’ Network NameCreate a Powerline network using the Pair button： Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button 5.1 Pair Secure with 128 bits-AESThe sequence of Step 1 and Step 2 can be exchanged Join an existing Powerline AV NetworkLeave an existing Powerline AV Network 3. The Powerline LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 2. The Ethernet LED does not light up. Ans. Check the following