TP-Link manual TL-PA4010 AV500 Nano Powerline Adapter,  Note, Reset Device

Page 26
To upgrade the device's firmware, follow these instructions:

TL-PA4010AV500 Nano Powerline Adapter

If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB files together. New firmware versions and PIB files are posted at www.tp-link.com and can be downloaded for free.

Note:

The parameter information of PIB will restore to the factory defaults after resetting the PLC.

To upgrade the device's firmware, follow these instructions:

1.Download PIB file and firmware upgrade file from the TP-LINK website (www.tp-link.com).

2.Enter the path name or click Note: to select the downloaded files on the computer into the corresponding blanks.

3.Click the OK button.

Note:

Do not turn off the device while the firmware is being upgraded. The device will reboot after the Upgrading has been finished.

4.4.2 Reset Device

This Management Utility allows you to reset the Powerline Adapter to its default settings.

Reset Local Device: Click this button to reset the settings of the local Powerline Adapter device only.

Reset All Devices: Click this button to reset the settings of all devices that appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network.

4.4.3Set All Devices’ Network Name

The Set All Devices’ Network Name button allows you to change the logical network of all devices that appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network. A dialog window will appear to report the success of this operation.

All Powerline devices are shipped using a default logical network (network name), which is normally “HomePlugAV”.

To set all devices’ network name, please type the name in the field and click the Set Network Name to apply the setting.

Note:

Every Powerline Adapter on your home network MUST have the same Network Password for connectivity to be established throughout your home.

20

Page 25 Page 27
Image 26
Page 25 Page 27
Contents TL-PA4010 AV500 Nano Powerline Adapter Rev 1.0.0COPYRIGHT & TRADEMARKS CE Mark Warning Safety InformationFCC STATEMENT This product can be used in the following countries Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITYProduct Description AV500 Nano Powerline Adapter EN EN EN 61000-3-22006+A12009+A22009 EN ENChapter 4 Using the Management Utility CONTENTSPackage Contents Appendix A Troubleshooting Note Package ContentsTL-PA4010 AV500 Nano Powerline Adapter 1.1 Conventions Chapter 1 Introduction1.3 Important Safety Instructions 1.2 System Requirement If liquid has been spilled on the product 2.1 Introduction Chapter 2 Connecting Mechanism2.2 LED Indicator StatusDescription 2.3 Physical InterfaceInterface 2.4 Connection Instruction 2.5 Hardware Connection - Computer2.6 Hardware Connection - Internet TL-PA4010 AV500 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status4.1.1 Set Local Device’s Network Name 4.2 Network 4.2.2 Add Device 4.2.1 Rename the Remote Device/Enter PasswordPassword is unnecessary to enter for renaming 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware  Note To upgrade the devices firmware, follow these instructions4.4.2 Reset Device 4.4.3 Set All Devices’ Network NameCreate a Powerline network using the Pair button： Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button 5.1 Pair Secure with 128 bits-AESThe sequence of Step 1 and Step 2 can be exchanged Join an existing Powerline AV NetworkLeave an existing Powerline AV Network 3. The Powerline LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 2. The Ethernet LED does not light up. Ans. Check the following
Top Page Image Contents