TP-Link manual System, TL-PA4010 AV500 Nano Powerline Adapter

Page 24

4.4 System

TL-PA4010AV500 Nano Powerline Adapter

Simple Application Mapping: The group allows you to choose what type of traffic with the highest user priority you will use your local HomePlug device for by pitching one of the following radios. Please select the radio type according to your demand.

Advanced Priority Mapping: The group sets VLAN priority to CAP mapping and default priority. Note that in HomePlug, CAP 3 is the highest priority while CAP 0 is the lowest priority. The values shown in VLAN Tags Priority are the default settings for the first running.

4.4 System

The System tab window is for some basic settings of the adapter. On this tab window, you can upgrade the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all adapters’ network names.

18

Image 24

Contents TL-PA4010 AV500 Nano Powerline Adapter Rev 1.0.0COPYRIGHT & TRADEMARKS Safety Information FCC STATEMENTCE Mark Warning This product can be used in the following countries DECLARATION OF CONFORMITY Product Description AV500 Nano Powerline AdapterRd, Nanshan, Shenzhen, China EN EN EN 61000-3-22006+A12009+A22009 EN ENCONTENTS Package ContentsChapter 4 Using the Management Utility Appendix A TroubleshootingPackage Contents TL-PA4010 AV500 Nano Powerline Adapter Note Chapter 1 Introduction 1.3 Important Safety Instructions1.1 Conventions 1.2 System Requirement If liquid has been spilled on the product Chapter 2 Connecting Mechanism 2.2 LED Indicator2.1 Introduction Status2.3 Physical Interface InterfaceDescription 2.4 Connection Instruction 2.5 Hardware Connection - Computer2.6 Hardware Connection - Internet TL-PA4010 AV500 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status4.1.1 Set Local Device’s Network Name 4.2 Network 4.2.1 Rename the Remote Device/Enter Password Password is unnecessary to enter for renaming4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware To upgrade the devices firmware, follow these instructions 4.4.2 Reset Device Note 4.4.3 Set All Devices’ Network NameChapter 5 Advanced Feature How to Use the Pair Buttons 5.2 Set Up a Powerline AV Network with the Pair ButtonCreate a Powerline network using the Pair button： 5.1 Pair Secure with 128 bits-AESJoin an existing Powerline AV Network Leave an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged Appendix A Troubleshooting 1. The Power LED does not light up. Ans. Check the following3. The Powerline LED does not light up 2. The Ethernet LED does not light up. Ans. Check the following