TP-Link manual Package Contents, TL-PA4010 AV500 Nano Powerline Adapter,  Note

Page 7
TL-PA4010AV500 Nano Powerline Adapter

TL-PA4010AV500 Nano Powerline Adapter

Package Contents

The AV500 Nano Powerline Adapter package contains the following items:

One AV500 Nano Powerline Adapter (There are two AV500 Nano Powerline Adapters in Starter Kit)

One RJ-45 Ethernet Cable (There are two RJ-45 Ethernet Cables in Starter Kit)

One Resource CD

This Guide

Management Utility

Note:

Make sure that the package contains the above items. If any of the above items are damaged or missing, please contact your dealer immediately.

1

Image 7
Contents Rev 1.0.0 TL-PA4010 AV500 Nano Powerline AdapterCOPYRIGHT & TRADEMARKS FCC STATEMENT Safety InformationCE Mark Warning This product can be used in the following countries EN EN EN 61000-3-22006+A12009+A22009 EN EN DECLARATION OF CONFORMITYProduct Description AV500 Nano Powerline Adapter Rd, Nanshan, Shenzhen, ChinaAppendix A Troubleshooting CONTENTSPackage Contents Chapter 4 Using the Management UtilityTL-PA4010 AV500 Nano Powerline Adapter Package Contents Note 1.2 System Requirement Chapter 1 Introduction1.3 Important Safety Instructions 1.1 Conventions If liquid has been spilled on the product Status Chapter 2 Connecting Mechanism2.2 LED Indicator 2.1 IntroductionInterface 2.3 Physical InterfaceDescription 2.5 Hardware Connection - Computer 2.4 Connection Instruction2.6 Hardware Connection - Internet  Note Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility4.1.1 Set Local Device’s Network Name 4.2 Network Password is unnecessary to enter for renaming 4.2.1 Rename the Remote Device/Enter Password4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware 4.4.3 Set All Devices’ Network Name To upgrade the devices firmware, follow these instructions4.4.2 Reset Device  Note5.1 Pair Secure with 128 bits-AES Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button Create a Powerline network using the Pair button:Leave an existing Powerline AV Network Join an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 2. The Ethernet LED does not light up. Ans. Check the following Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 3. The Powerline LED does not light up