TP-Link manual TL-PA4010 AV500 Nano Powerline Adapter, Set Local Device’s Network Name

Contents TL-PA4010 AV500 Nano Powerline Adapter Rev 1.0.0COPYRIGHT & TRADEMARKS CE Mark Warning Safety InformationFCC STATEMENT This product can be used in the following countries DECLARATION OF CONFORMITY Product Description AV500 Nano Powerline AdapterRd, Nanshan, Shenzhen, China EN EN EN 61000-3-22006+A12009+A22009 EN ENCONTENTS Package ContentsChapter 4 Using the Management Utility Appendix A Troubleshooting Note Package ContentsTL-PA4010 AV500 Nano Powerline Adapter Chapter 1 Introduction 1.3 Important Safety Instructions1.1 Conventions 1.2 System Requirement If liquid has been spilled on the product Chapter 2 Connecting Mechanism 2.2 LED Indicator2.1 Introduction StatusDescription 2.3 Physical InterfaceInterface 2.4 Connection Instruction 2.5 Hardware Connection - Computer2.6 Hardware Connection - Internet TL-PA4010 AV500 Nano Powerline Adapter Chapter 3 Installing Management Utility TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter TL-PA4010 AV500 Nano Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status4.1.1 Set Local Device’s Network Name 4.2 Network 4.2.2 Add Device 4.2.1 Rename the Remote Device/Enter PasswordPassword is unnecessary to enter for renaming 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware To upgrade the devices firmware, follow these instructions 4.4.2 Reset Device Note 4.4.3 Set All Devices’ Network NameChapter 5 Advanced Feature How to Use the Pair Buttons 5.2 Set Up a Powerline AV Network with the Pair ButtonCreate a Powerline network using the Pair button： 5.1 Pair Secure with 128 bits-AESThe sequence of Step 1 and Step 2 can be exchanged Join an existing Powerline AV NetworkLeave an existing Powerline AV Network Appendix A Troubleshooting 1. The Power LED does not light up. Ans. Check the following3. The Powerline LED does not light up 2. The Ethernet LED does not light up. Ans. Check the following