KTI Networks kgs-1601 manual Settings Functions, Port Port Number 1~16, EgressTagging

Page 19

PVID

When the VLAN-enabled switch receives a untagged packet, the packet will be sent to the port default VLAN according to the PVID (port VLAN ID) of the ingress port.

Settings	Functions
Port	Port Number 1~16
PVID	Port VLAN ID(1~4094)
	For Ingress VLAN mapping rules, refer to the following table:
	Only Tagged	Received Packet Type	VLAN entry mapped
	Disable	Untagged	Ingress port PVID
	Disable	Tagged	Received packet VID
	Enable	Untagged	Drop received packet
	Enable	Tagged	Received packet VID
EgressTagging	Check the box to enable egress tagging before packet transmission.

For the detail egress tagging rules, refer to the following table:

	Tagging	Received Packet	Egress Packet
	Disable	Untagged	Untagged (no modification)
		Tagged	Untagged (VID tag is removed)
	Enable	Untagged	Insert VID Tag with ingress port PVID
		Tagged	Tagged (no modification)
Only Tagged	Check box to enable the port to drop all received untagged frames
Apply	Click button to save the changes you made.

-19-

Image 19

Contents Port Gigabit Ethernet Switch KGS-1601 Installation Guide Page Trademarks Table of Contents Factory Default Configuration Unpacking Information Key Features Introduction to 16-port Gigabit Web Smart SwitchGeneral Description LEDs Definition Wiring for 10/100/1000Mbps CopperFront Panel Port OperationRear Panel Rear panel of the switch is shown as belowDesktop Installation Installing 16-Port Gigabit Web Smart SwitchRack-mount Installation Station Connections Installing Network CablesSwitch-to-Switch Connections Network ApplicationFunctional Description Console Port Out-of-band connection Access the SwitchFactory Default value Web Management guideHome After authentication procedure, the home page shows upAggregation QoS Mirror Statistics Discovery Page Ables timeout. Timeout value in seconds, 0 Status & Setting FunctionsSystem Maximum value is Status & Settings FunctionsBetter network performance you will have. Default is 1518. PortsTo remove the Vlan entry There are 16 entries to set upVlan Entry To add new Vlan EntryPort Port Number 1~16 Settings FunctionsEgressTagging 5 QoS Aggregation/ Trunking ConfigurationTOS Value Precedence Quality of Service QoS TOS ConfigurationQoS Port Ingress Rate Control QoS Port Egress Rate ControlQoS Port Broadcast Storm Statistics MirrorRemove DiscoveryAuto Search Manual AddReboot DefaultProduct Specifications Command Hierarchy Command Line InterfaceStart-up and Terminal configuration Login/Logout ProceduresPrompt at top level You can get command information by entering ? or helpHelp after a specific command Example Systemconfiguration ? Help UtilityEntering Commands Example 00-00-24-F1-02-03 Command DescriptionTerminology MAC Address format hh-hh-hh-hh-hh-hh,hhhhhhhhhhhh orSystem Commands Port Commands Console CommandsPort MaxFrame Port ModePort Flow Control Port StateMAC Table Commands Vlan Commands Aggregation/trunking Commands QoS Commands QoS Storm Control QoS TosprecedenceQoS Egress Rate QoS Ingress RateIP Commands Mirror CommandsPvid ExampleFactory Default Configuration

PVID

Settings

Functions

Port

Port Number 1~16

PVID

EgressTagging

Tagging

Received Packet

Egress Packet