KTI Networks kgs-1601 manual Factory Default Configuration

Page 41

8. Factory Default Configuration

The factory default configuration is a VLAN aware L2 switch with automatic learning/ageing and auto negotiation enabled on all ports:

System:	The system name string is empty.
Console:	The password string is empty and inactivity timeout is disabled. The prompt is >.
Port:	All ports are enabled for auto negotiation and flow control is disabled. Max
	frame size is 1518.
MAC table:	The table is empty, auto learning and ageing is enabled. The ageing timer is 300
	seconds.
VLAN:	Only VLAN 1 is present in the table and includes all ports. All ports are VLAN
	egress tagging disabled with Port VLAN ID 1. All ports accept all frame types.
Aggregation:	No ports are aggregated, but aggregation mode is set to XOR.
QoS:	IP ToS Precedence priority is enabled and all Precedence values are given high
	priority. The 4 highest VLAN tag priorities are given high priority. The UDP/
	TCP port list is empty. Default priority is high. Default user priority is 0. L4
	default priority and match priority are low. All EgressRate control and
	IngressRate control are disabled.
Mirror:	Mirroring is disabled.

-41-

Image 41

Contents Port Gigabit Ethernet Switch KGS-1601 Installation Guide Page Trademarks Table of Contents Factory Default Configuration Unpacking Information General Description Introduction to 16-port Gigabit Web Smart SwitchKey Features Front Panel Wiring for 10/100/1000Mbps CopperPort Operation LEDs DefinitionRear Panel Rear panel of the switch is shown as belowRack-mount Installation Installing 16-Port Gigabit Web Smart SwitchDesktop Installation Switch-to-Switch Connections Installing Network CablesNetwork Application Station ConnectionsFunctional Description Factory Default value Access the SwitchWeb Management guide Console Port Out-of-band connectionAggregation QoS Mirror Statistics Discovery After authentication procedure, the home page shows upHome Page System Status & Setting FunctionsAbles timeout. Timeout value in seconds, 0 Better network performance you will have. Default is 1518. Status & Settings FunctionsPorts Maximum value isVlan Entry There are 16 entries to set upTo add new Vlan Entry To remove the Vlan entryEgressTagging Settings FunctionsPort Port Number 1~16 5 QoS Aggregation/ Trunking ConfigurationTOS Value Precedence Quality of Service QoS TOS ConfigurationQoS Port Broadcast Storm QoS Port Egress Rate ControlQoS Port Ingress Rate Control Statistics MirrorAuto Search DiscoveryManual Add RemoveReboot DefaultProduct Specifications Start-up and Terminal configuration Command Line InterfaceLogin/Logout Procedures Command HierarchyHelp after a specific command Example Systemconfiguration ? You can get command information by entering ? or helpHelp Utility Prompt at top levelEntering Commands Terminology Command DescriptionMAC Address format hh-hh-hh-hh-hh-hh,hhhhhhhhhhhh or Example 00-00-24-F1-02-03System Commands Port Commands Console CommandsPort Flow Control Port ModePort State Port MaxFrameMAC Table Commands Vlan Commands Aggregation/trunking Commands QoS Commands QoS Egress Rate QoS TosprecedenceQoS Ingress Rate QoS Storm ControlIP Commands Mirror CommandsPvid ExampleFactory Default Configuration