KTI Networks kgs-1601 manual Terminology, Command Description, Example 00-00-24-F1-02-03

7.6 Terminology

The following table shows general parameter types used in command syntaxes and descriptions.

<port>	The port number
<portlist>	Comma and/or dash separated port list. This type can be used for specifying
	individual ports or a range of ports. The keyword none can be used to specify an
	empty port list. The keyword all can be used to specify all ports. Example: 1,3,8-
	12.
<macaddress>	MAC Address; format: hh-hh-hh-hh-hh-hh,hh:hh:hh:hh:hh:hh or
	hhhhhhhhhhhh. The hh is Hexadecimal number in the range 0x00 to 0xFF.
	Example: 00-00-24-F1-02-03
<vid>	VLAN ID: Decimal number in the range 1-4095. The keyword all can be used
	to specify all VLAN IDs.
<vidlist>	Comma and/or dash separated VLAN ID list. This type can be used for specify-
	ing individual VLAN IDs or a range of VLAN IDs. The keyword none can be
	used to specify an empty VLAN ID list. Example: 1,2,4-6

<UDP/TCP port> UDP/TCP port number: Decimal number in the range 0-65535.

<rate> Leaky bucket rate in Kbit/s [0-1000000k] or Mbit/s [0-1000m]

The <portlist> type is helpful when setting up multiple ports in the same mode. For example, the following commands divide the ports into two untagged VLANs and enable VLAN awareness:

vlan add 1 1-8 vlan add 2 9-16 vlan pvid 1-8 1 vlan pvid 9-16 2 vlan aware all enable

7.7 Command Description

In this session, the commands in each group and the descriptions to those commands are provided respectively in the following group order:

1.System

2.Console

3.Port

4.MAC

5.VLAN

6.Aggregation

7.QoS

8.Mirror

9.IP

-30-