5.2.8 Discovery
When you install several switches in the network, the discovery management tool helps you to search and access those switches easily. Therefore you can access any switch without memorizing the re- spective IP addresses.
Note:
The Maximum number of Address list is 16 for each mode.
Auto Search
1.Click the Auto search [Apply] button to find the switches.
2.The IP address & name of Switch list will appear.
3.Click the one you want to access.
Manual Add
1.Enter the IP address & name in the text box
2.Click [Add] to add the new IP address on the table
Remove
1.Click the check box of the switch you want to remove from the list.
2.Click [Delete] to remove.