Modbus TCP Remote I/O Communication Module
the communication. The IP of the gateway has to be in the same subnet as
3.Timer setting:
For setting up TCP connection idle time, Modbus
6.4Network Settings
The first step for all the equipment to connect to the network is to have its own IP (Internet Protocol) address. The IP address is like a number for every equipment to be identified on the network.
Setting up static IP of the PC
1.Enter Control Panel → Network Connection → click “Local Area Connection".
2.You will see the “Local Area Connection Status” window. Click “Properties”.
3.Click “Internet Protocol (TCP/IP)”.
21 |