Compaq PC CARD ADAPTER manual Installation and Configuration Options, AutoLink Installation

Page 15

Installation and Configuration Options

1-3

If your computer is using a memory manager (all computers using Microsoft® Windowsuse a memory manager such as EMM386 or its equivalent), you must set aside upper memory for the Card Services memory, the MMIO area, and the shared RAM area. Refer to the section “Avoiding Memory Manager Conflicts” in Chapter 3 or 4, or Appendix A, for a sample procedure.

Installation and Configuration Options

The software on the TokenDisk diskette provides two methods to install the adapter:

AutoLinkinstallation

Standard installation and configuration

These methods are described in the following sections.

AutoLink Installation

The AutoLink feature can be used to make your computer a NetWare® DOS ODI client. The AutoLink program configures and tests the 3C689 adapter, installs the client driver and NetWare client files, and modifies computer startup files to allow you to log in to a NetWare server after you reboot your computer. For more information about the AutoLink feature, see Chapter 3, “Using the AutoLink Feature for NetWare.”

Standard Installation and Configuration

The standard installation and configuration procedures can be used to configure the 3C689 adapter, test the adapter, and install drivers in DOS- and OS/2-based network operating systems. For more information about these procedures, refer to Chapter 4, “Standard Installation and Configuration,” Chapter 5, “Installing Network Drivers,” and Chapter 6, “Troubleshooting.”

Image 15
Contents Member of the TokenLink III product family PC Card Adapter User Guide3Com Corporation 5400 Bayfront Plaza Santa Clara, California Lifetime Warranty France, Israel Contents Using the Autolink Feature for Netware About Card Services Page Figures Tables How to Use This Guide About this GuideIntroduction Conventions Install3C689 Adapter Introduction3C689 Adapter Requirements 3C689 Adapter FeaturesInstallation and Configuration Options AutoLink InstallationStandard Installation and Configuration Card Services TroubleshootingTranscend PC Link SmartAgent Software Troubleshooting 100% Compatibility Money-Back GuaranteeAdapter Installing the 3C689STP connector Unpacking the AdapterInserting the Adapter Inserting the 3C689 Adapter Connecting the Adapter to the CableUTP Cable Network Connection Connecting the 3C689 Cable to the NetworkSTP Network Connection Use the supplied STP connector to connectRemoving the Adapter Remove the adapter from your computerStore the adapter card in its original or similar packaging Feature for N ET Ware Using the Auto LinkAutoLink Options AutoLink RequirementsCIS memory 4 K Mmio memory 8 K Shared RAM page size 16 K Avoiding Memory Manager ConflictsType at the prompt Using the AutoLink FeatureConfiguration Standard InstallationConfiguration Requirements Using Auto Configuration I N N U Select the correct ring speed and press EnterI/O Base Address parameter is automatically highlighted Changing Configuration SettingsSaving Settings to Use for Installing Other Adapters Installing Network Installation stepsDrivers DEC Pathworks Installing the Novell NetWare DOS ODI DriverMain Menu with Network Drivers Option Selected Updating the Computer Startup Files LSL 3C689 Ipxodi VLM H Login Installing the OS/2 Network Driver for NetWare Installing the Ndis 2.01 DriverBuild a PROTOCOL.INI file in the Lanman subdirectory Drivername = TLPC3$ Primary Interrupt = Mmio = 0XCC00 Using the 3C689 Adapter with Windows for Workgroups Execute the WFW setup program. TypeFollow the instructions on the screen To specify the directory, type Using IBM LAN Support Program Drivers Updating the Current Ndis Driver Installing the OS/2 Network Driver for NdisUsing the TokenDisk Diskette Diagnostic Program TroubleshootingDepicts how to use the TokenDisk diskette diagnostic program Diagnostic Test TypesGroup 1 Diagnostics Running Diagnostic TestsI N N U Tests Menu Press Enter to start the tests Changing the Test SetupWhen Tests Fail Adapter Statistics and Information Adapter StatisticsAdapter Information Make sure that your computer is running DOS 3.1 or higher Troubleshooting TipsTo print the file, press Alt+F+P or type CONFIG.SYS File About Card ServicesVerifying Card Services Is Installed Boot Screen DisplayAt the prompt, type If Your Computer Does Not Have Card ServicesTo edit out this command, type REM in front of it Save the CONFIG.SYS file and reboot the computerWhere x stands for exclude, followed by the memory range Write down the memory ranges that the 3C689 adapter is usingSpecifications Mmio Address Location Configuration OptionsRing Speed Base AddressKB / CE000-CFFFF Shared RAM Page Size and Address RangeInterrupt Request Level On-line Technical Services 3Com Bulletin Board ServiceTechnical Support To use Ask3Com Log on to CompuServe 3ComFacts Automated Fax ServiceWorld Wide Web Site Ask3Com on CompuServeDetails about recent configuration changes, if applicable Support from Your Network SupplierTo obtain an RMA number, call or fax Returning Products for RepairCard Information Structure CIS Card ServicesGlossary AutoLinkIeee DriverPersonal Computer Memory Card International Association PacketUnshielded twisted-pair Shielded twisted-pair Token ringNumerics IndexGroup 1 diagnostic test 6-3 Group 2 diagnostic test Drivers UTP cable network connection Limited Warranty FCC Class a Verification Statement