Compaq PC CARD ADAPTER manual Using IBM LAN Support Program Drivers

Page 45

Installing the NDIS 2.01 Driver

5-11

17Immediately following the line DRIVERNAME=TLPC3$, include the text from the PROTOCOL.PCM ﬁle.

For example, if you are using Card Services, the statements should look similar to the following:

[TLPC3]

DRIVERNAME=TLPC3$ RINGSPEED=16

Or, if you are not using Card Services, the statements should look similar to the following:

[TLPC3]

DRIVERNAME=TLPC3$ PRIMARY INTERRUPT=3 MMIO=0XCC00 RAM=0XD000 RAMSIZE=16

RINGSPEED=16

18Save the ﬁle and exit.

This completes the procedure that imports the driver during installation of Windows for Workgroups.

Using IBM LAN Support Program Drivers

You can install IBM LAN Support Program (LSP) drivers with the 3C689 adapter. IBM's LSP drivers do not have any embedded support to initialize PC Card adapters.

3Com provides an enabler program that works with the protocol manager to initialize the PC Card adapter. You must load the enabler program and protocol manager before loading the IBM LSP drivers. The LANSUP subdirectory of the TokenDisk diskette contains the enabler program (LSPEN.3CM), the protocol manager (PROTMAN.DOS), and installation instructions (LANSUP.TXT).

Image 45

Contents Member of the TokenLink III product family PC Card Adapter User Guide3Com Corporation 5400 Bayfront Plaza Santa Clara, California Lifetime Warranty France, Israel Contents Using the Autolink Feature for Netware About Card Services Page Figures Tables How to Use This Guide About this GuideIntroduction Conventions Install3C689 Adapter Introduction3C689 Adapter Requirements 3C689 Adapter FeaturesInstallation and Conﬁguration Options AutoLink InstallationStandard Installation and Conﬁguration Card Services TroubleshootingTranscend PC Link SmartAgent Software Troubleshooting 100% Compatibility Money-Back GuaranteeAdapter Installing the 3C689STP connector Unpacking the AdapterInserting the Adapter Inserting the 3C689 Adapter Connecting the Adapter to the CableUTP Cable Network Connection Connecting the 3C689 Cable to the NetworkSTP Network Connection Use the supplied STP connector to connectRemoving the Adapter Remove the adapter from your computerStore the adapter card in its original or similar packaging Feature for N ET Ware Using the Auto LinkAutoLink Options AutoLink RequirementsCIS memory 4 K Mmio memory 8 K Shared RAM page size 16 K Avoiding Memory Manager ConﬂictsType at the prompt Using the AutoLink FeatureConfiguration Standard InstallationConﬁguration Requirements Using Auto Conﬁguration I N N U Select the correct ring speed and press EnterI/O Base Address parameter is automatically highlighted Changing Conﬁguration SettingsSaving Settings to Use for Installing Other Adapters Installing Network Installation stepsDrivers DEC Pathworks Installing the Novell NetWare DOS ODI DriverMain Menu with Network Drivers Option Selected Updating the Computer Startup Files LSL 3C689 Ipxodi VLM H Login Installing the OS/2 Network Driver for NetWare Installing the Ndis 2.01 DriverBuild a PROTOCOL.INI ﬁle in the Lanman subdirectory Drivername = TLPC3$ Primary Interrupt = Mmio = 0XCC00 Using the 3C689 Adapter with Windows for Workgroups Execute the WFW setup program. TypeFollow the instructions on the screen To specify the directory, type Using IBM LAN Support Program Drivers Updating the Current Ndis Driver Installing the OS/2 Network Driver for NdisUsing the TokenDisk Diskette Diagnostic Program TroubleshootingDepicts how to use the TokenDisk diskette diagnostic program Diagnostic Test TypesGroup 1 Diagnostics Running Diagnostic TestsI N N U Tests Menu Press Enter to start the tests Changing the Test SetupWhen Tests Fail Adapter Statistics and Information Adapter StatisticsAdapter Information Make sure that your computer is running DOS 3.1 or higher Troubleshooting TipsTo print the ﬁle, press Alt+F+P or type Verifying Card Services Is Installed About Card ServicesBoot Screen Display CONFIG.SYS FileTo edit out this command, type REM in front of it If Your Computer Does Not Have Card ServicesSave the CONFIG.SYS ﬁle and reboot the computer At the prompt, typeWhere x stands for exclude, followed by the memory range Write down the memory ranges that the 3C689 adapter is usingSpecifications Ring Speed Conﬁguration OptionsBase Address Mmio Address LocationKB / CE000-CFFFF Shared RAM Page Size and Address RangeInterrupt Request Level On-line Technical Services 3Com Bulletin Board ServiceTechnical Support World Wide Web Site 3ComFacts Automated Fax ServiceAsk3Com on CompuServe To use Ask3Com Log on to CompuServeDetails about recent conﬁguration changes, if applicable Support from Your Network SupplierTo obtain an RMA number, call or fax Returning Products for RepairGlossary Card ServicesAutoLink Card Information Structure CISIeee DriverPersonal Computer Memory Card International Association PacketUnshielded twisted-pair Shielded twisted-pair Token ringNumerics IndexGroup 1 diagnostic test 6-3 Group 2 diagnostic test Drivers UTP cable network connection Limited Warranty FCC Class a Verification Statement