Compaq PC CARD ADAPTER manual Shielded twisted-pair Token ring, Unshielded twisted-pair

Page 71

4GLOSSARY

STP

Shielded twisted-pair.

Token ring

A network that employs a ring topology and uses a token-passing method for ring access.

TSR

Terminate and stay resident. A program that upon execution, loads itself (or an executable portion of itself) into computer working memory (RAM). It can be activated at any time with a specified key sequence.

Type I card

In the PC Card environment, a 3.3 mm thick card that is typically used for memory cards.

Type I slot

In the PC Card environment, a slot that accepts a Type I card.

Type II card

In the PC Card environment, a 5.0 mm thick card that is typically used for modem/fax cards and network adapters.

Type II slot

In the PC Card environment, a slot that accepts a Type I or Type II card.

Type III card

In the PC Card environment, a 10.5 mm thick card that is typically used for hard disk drives.

Type III slot

In the PC Card environment, a slot that accepts a Type I, II, or III card.

Twisted-pair

Wiring similar to that found in the telephone system, consisting of two insulated wires loosely twisted around each other to help cancel out induced noise in balanced circuits.

UTP

Unshielded twisted-pair.

Image 71
Contents Member of the TokenLink III product family PC Card Adapter User Guide3Com Corporation 5400 Bayfront Plaza Santa Clara, California Lifetime Warranty France, Israel Contents Using the Autolink Feature for Netware About Card Services Page Figures Tables Introduction How to Use This GuideAbout this Guide Conventions Install3C689 Adapter Introduction3C689 Adapter Requirements 3C689 Adapter FeaturesStandard Installation and Configuration Installation and Configuration OptionsAutoLink Installation Transcend PC Link SmartAgent Software Card ServicesTroubleshooting Troubleshooting 100% Compatibility Money-Back GuaranteeAdapter Installing the 3C689Inserting the Adapter STP connectorUnpacking the Adapter Inserting the 3C689 Adapter Connecting the Adapter to the CableUTP Cable Network Connection Connecting the 3C689 Cable to the NetworkSTP Network Connection Use the supplied STP connector to connectStore the adapter card in its original or similar packaging Removing the AdapterRemove the adapter from your computer Feature for N ET Ware Using the Auto LinkAutoLink Options AutoLink RequirementsCIS memory 4 K Mmio memory 8 K Shared RAM page size 16 K Avoiding Memory Manager ConflictsType at the prompt Using the AutoLink FeatureConfiguration Standard InstallationConfiguration Requirements Using Auto Configuration I N N U Select the correct ring speed and press EnterI/O Base Address parameter is automatically highlighted Changing Configuration SettingsSaving Settings to Use for Installing Other Adapters Drivers Installing NetworkInstallation steps DEC Pathworks Installing the Novell NetWare DOS ODI DriverMain Menu with Network Drivers Option Selected Updating the Computer Startup Files LSL 3C689 Ipxodi VLM H Login Installing the OS/2 Network Driver for NetWare Installing the Ndis 2.01 DriverBuild a PROTOCOL.INI file in the Lanman subdirectory Drivername = TLPC3$ Primary Interrupt = Mmio = 0XCC00 Follow the instructions on the screen Using the 3C689 Adapter with Windows for WorkgroupsExecute the WFW setup program. Type To specify the directory, type Using IBM LAN Support Program Drivers Updating the Current Ndis Driver Installing the OS/2 Network Driver for NdisUsing the TokenDisk Diskette Diagnostic Program TroubleshootingDepicts how to use the TokenDisk diskette diagnostic program Diagnostic Test TypesGroup 1 Diagnostics Running Diagnostic TestsI N N U Tests Menu Press Enter to start the tests Changing the Test SetupWhen Tests Fail Adapter Information Adapter Statistics and InformationAdapter Statistics Make sure that your computer is running DOS 3.1 or higher Troubleshooting TipsTo print the file, press Alt+F+P or type CONFIG.SYS File About Card ServicesVerifying Card Services Is Installed Boot Screen DisplayAt the prompt, type If Your Computer Does Not Have Card ServicesTo edit out this command, type REM in front of it Save the CONFIG.SYS file and reboot the computerWhere x stands for exclude, followed by the memory range Write down the memory ranges that the 3C689 adapter is usingSpecifications Mmio Address Location Configuration OptionsRing Speed Base AddressKB / CE000-CFFFF Shared RAM Page Size and Address RangeInterrupt Request Level Technical Support On-line Technical Services3Com Bulletin Board Service To use Ask3Com Log on to CompuServe 3ComFacts Automated Fax ServiceWorld Wide Web Site Ask3Com on CompuServeDetails about recent configuration changes, if applicable Support from Your Network SupplierTo obtain an RMA number, call or fax Returning Products for RepairCard Information Structure CIS Card ServicesGlossary AutoLinkIeee DriverPersonal Computer Memory Card International Association PacketUnshielded twisted-pair Shielded twisted-pair Token ringNumerics IndexGroup 1 diagnostic test 6-3 Group 2 diagnostic test Drivers UTP cable network connection Limited Warranty FCC Class a Verification Statement