Compaq PC CARD ADAPTER manual Select the correct ring speed and press Enter, I N N U

Page 32

4-4 CHAPTER 4: STANDARD INSTALLATION AND CONFIGURATION

4Select the Auto Conﬁgure 3Com PC Card Adapter option, as shown in Figure 4-2, and press [Enter].

This step conﬁgures the I/O Base Address and the Interrupt Request Level to settings that do not conﬂict with any other device on your computer.

The Select Ring Speed screen appears with 16 Mbps highlighted as the default speed.

TokenDisk for the TokenLink III PC Card Adapter

ESC=Cancel	F1=Help
M A I N	M E N U

Auto Installation with Configuration (AutoLink)

NetWare DOS ODI Client

Standard Installation and Configuration

Auto Configure 3Com PC Card Adapter

Network Drivers ...

Configuration/Diagnostic/Troubleshooting ...

General Information/Release Notes

Automatically configures the adapter to non-conflicting settings

[ENTER]=Execute Function [−↓]=Scroll

[F1]=Help [ESC]=<Cancel>

Figure 4-2 Main Menu with Auto Conﬁgure Option Selected

5Select the correct ring speed and press [Enter].

A message appears, telling you the 3C689 adapter has been conﬁgured successfully. The conﬁguration settings are saved to the NET.PCM and PROTOCOL.PCM ﬁles.

The next step is to install the network drivers. If you need to change the conﬁguration settings before you install the drivers, follow the steps in the next section. Otherwise, proceed to Chapter 5, “Installing Network Drivers,” for instructions on installing the network drivers.

Image 32

Contents PC Card Adapter User Guide Member of the TokenLink III product family3Com Corporation 5400 Bayfront Plaza Santa Clara, California Lifetime Warranty France, Israel Contents Using the Autolink Feature for Netware About Card Services Page Figures Tables Introduction How to Use This GuideAbout this Guide Install ConventionsIntroduction 3C689 Adapter3C689 Adapter Features 3C689 Adapter RequirementsStandard Installation and Conﬁguration Installation and Conﬁguration OptionsAutoLink Installation Transcend PC Link SmartAgent Software Card ServicesTroubleshooting Troubleshooting Money-Back Guarantee 100% CompatibilityInstalling the 3C689 AdapterInserting the Adapter STP connectorUnpacking the Adapter Connecting the Adapter to the Cable Inserting the 3C689 AdapterConnecting the 3C689 Cable to the Network UTP Cable Network ConnectionUse the supplied STP connector to connect STP Network ConnectionStore the adapter card in its original or similar packaging Removing the AdapterRemove the adapter from your computer Using the Auto Link Feature for N ET WareAutoLink Requirements AutoLink OptionsAvoiding Memory Manager Conﬂicts CIS memory 4 K Mmio memory 8 K Shared RAM page size 16 KUsing the AutoLink Feature Type at the prompt Standard Installation ConfigurationConﬁguration Requirements Using Auto Conﬁguration Select the correct ring speed and press Enter I N N UChanging Conﬁguration Settings I/O Base Address parameter is automatically highlightedSaving Settings to Use for Installing Other Adapters Drivers Installing NetworkInstallation steps Installing the Novell NetWare DOS ODI Driver DEC PathworksMain Menu with Network Drivers Option Selected Updating the Computer Startup Files LSL 3C689 Ipxodi VLM H Login Installing the Ndis 2.01 Driver Installing the OS/2 Network Driver for NetWareBuild a PROTOCOL.INI ﬁle in the Lanman subdirectory Drivername = TLPC3$ Primary Interrupt = Mmio = 0XCC00 Follow the instructions on the screen Using the 3C689 Adapter with Windows for WorkgroupsExecute the WFW setup program. Type To specify the directory, type Using IBM LAN Support Program Drivers Installing the OS/2 Network Driver for Ndis Updating the Current Ndis DriverTroubleshooting Using the TokenDisk Diskette Diagnostic ProgramDiagnostic Test Types Depicts how to use the TokenDisk diskette diagnostic programRunning Diagnostic Tests Group 1 DiagnosticsI N N U Tests Menu Changing the Test Setup Press Enter to start the testsWhen Tests Fail Adapter Information Adapter Statistics and InformationAdapter Statistics Troubleshooting Tips Make sure that your computer is running DOS 3.1 or higherTo print the ﬁle, press Alt+F+P or type About Card Services Verifying Card Services Is InstalledBoot Screen Display CONFIG.SYS FileIf Your Computer Does Not Have Card Services To edit out this command, type REM in front of itSave the CONFIG.SYS ﬁle and reboot the computer At the prompt, typeWrite down the memory ranges that the 3C689 adapter is using Where x stands for exclude, followed by the memory rangeSpecifications Conﬁguration Options Ring SpeedBase Address Mmio Address LocationShared RAM Page Size and Address Range KB / CE000-CFFFFInterrupt Request Level Technical Support On-line Technical Services3Com Bulletin Board Service 3ComFacts Automated Fax Service World Wide Web SiteAsk3Com on CompuServe To use Ask3Com Log on to CompuServeSupport from Your Network Supplier Details about recent conﬁguration changes, if applicableReturning Products for Repair To obtain an RMA number, call or faxCard Services GlossaryAutoLink Card Information Structure CISDriver IeeePacket Personal Computer Memory Card International AssociationShielded twisted-pair Token ring Unshielded twisted-pairIndex NumericsGroup 1 diagnostic test 6-3 Group 2 diagnostic test Drivers UTP cable network connection Limited Warranty FCC Class a Verification Statement