Apple CPX3 manual Operating, Adjusting the volume, Temporarily muting the sound

Operating

	Operating
Adjusting the volume		VOLUME +/- button
1.	Use the VOLUME +/VOLUME - buttons to adjust the volume.
	A dialog will appear on the screen to aid you in adjusting the volume.		VIDEO	COMPUTER DOC.CAMERA
If you do not do anything, the dialog will automatically disappear after					MY SOURCE/
			ASPECT	AUTO	SEARCH	BLANK
a few seconds.			ON		UP
			MAGNIFY	FREEZE	PAGE	VOLUME
● When is selected for the AUDIO item of the AUDIO menu (32),			OFF		DOWN
the volume adjustment is disabled.			KEYSTONE	1	2
				MY BUTTON		MUTE
● When the projector is in the standby mode, the volume can be adjusted
if	is not selected for the AUDIO OUT STANDBY of AUDIO (35).		POSITION			MENU

● When the AUDIO OUT port connected with a external speaker, the built-in speaker is disabled.

Temporarily muting the sound

1. Press the MUTE button on the remote control.

A dialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE, VOLUME + or VOLUME - button. Even if you do not do anything, the dialog will automatically disappear after a few seconds.

●When is selected for the AUDIO item of the AUDIO menu (32), the volume adjustment is disabled.

●When is selected to VIDEO (NTSC), S-VIDEO (NTSC) or

MUTE button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE	PAGE		VOLUME
ON		UP
OFF		DOWN
KEYSTONE	MY BUTTON		2	MUTE
	1
POSITION				MENU

COMPONENT (525i (480i)) port, the C.C. (Closed Caption) is automatically activated if the C.C. is set to AUTO in the DISPLAY of the C.C. menu and the input signal from the port supports the C.C. feature (51).

Selecting an input signal		INPUT/ENTER
1.	Press the INPUT/ENTER button on the projector.	INPUT/	LAMP
	Each time you press the button, the projector switches its	STANDBY/ON ENTER MENU	TEMP
input port as below.			POWER
	COMPUTER IN1  COMPUTER IN2
	VIDEO  S-VIDEO  HDMI
1.	Press the COMPUTER button on the remote control.	COMPUTER button
	Each time you press the button, the projector switches its
input port as below.

COMPUTER IN1  COMPUTER IN2  HDMI

●If the COMPUTER button is pushed to switch from a signal from the VIDEO or S-VIDEO port, when TURN ON is selected for the AUTO SEARCH item in the OPTION menu (38), the projector will check the COMPUTER IN1 port first. If no input is detected at the port, the projector will check other port in above order.

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE	PAGE		VOLUME
ON		UP
OFF		DOWN
KEYSTONE	MY BUTTON		2	MUTE
	1
POSITION				MENU

(continued on next page)

14