Apple CPX3 manual Using the MyScreen Password Function, If you have forgotten your Password

OPTION Menu

OPTION Menu (continued)

Item	Description
	1.3 If you have forgotten your PASSWORD
	1.3-1 Follow the procedure in 1.1-1 to display the
	ENTER PASSWORD BOX.
	1.3-2 While the ENTER PASSWORD BOX is
	displayed, press and hold the RESET button
	for about 3 seconds or press and hold the
	INPUT and ► buttons on the projector for
	about 3 seconds
	The 10 digit Inquiring Code will be displayed.
	• If there is no key input for about 55 seconds while
	the Inquiring Code is displayed the menu will close.
	If necessary repeat the process from 1.3-1.
	1.3-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD
	will be sent after your user registration information is confirmed.

	2. Using the MyScreen PASSWORD Function
	The MyScreen PASSWORD function can be used to prohibit access to the
	MyScreen function and prevent the currently registered MyScreen image
SECURITY	from being overwritten.
	2.1 Turning on the MyScreen PASSWORD
(continued)	Function
	2.1-1 Use the ▲/▼ buttons on the SECURITY
	menu to select MyScreen PASSWORD and
	press the ► button to display the MyScreen
	PASSWORD on/off menu.
	2.2 Setting the PASSWORD
	2.2-1 Display the MyScreen on/off menu using the
	procedure in 2.1-1.
	2.2-2 Use the ▲/▼ buttons on the MyScreen
	PASSWORD on/off menu to select TURN ON.
	The ENTER PASSWORD BOX (small) will be
	displayed.
	2.2-3 Use the ▲/▼/◄/► buttons to enter the
	PASSWORD.
	Move the cursor to the right side of the ENTER
	PASSWORD BOX (small) and press the ►
	button to display the CHECK PASSWORD
	BOX, enter the same PASSWORD again.

(continued on next page)

44