Apple CPX3 Play monitor, Blank screen is displayed, Color settings are not correctly adjusted

Page 60

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The brightness is adjusted to an extremely low level.

21, 23

 

Adjust BRIGHTNESS to a higher level using the menu

 

function or the remote control.

 

No pictures are

The computer cannot detect the projector as a plug

 

displayed.

and play monitor.

9

(continued)

Make sure that the computer can detect a plug and play

 

 

monitor using another plug and play monitor.

 

 

The BLANK screen is displayed.

19

 

Press the BLANK button on the remote control.

 

 

Video screen

The FREEZE function is working.

19

display freezes.

Press the FREEZE button to restore the screen to normal.

 

 

Color settings are not correctly adjusted.

21, 24,

Colors have a

Perform picture adjustments by changing the COLOR

faded- out

TEMP, COLOR, TINT and/or COLOR SPACE settings,

28

appearance, or

using the menu functions.

 

Color tone is

COLOR SPACE setting is not suitable.

 

poor.

Change the COLOR SPACE setting to AUTO, RGB,

28

 

SMPTE240, REC709 or REC601.

 

 

The brightness and/or contrast are adjusted to an

 

 

extremely low level.

21, 23

 

Adjust BRIGHTNESS and/or CONTRAST settings to a

 

 

 

higher level using the menu function.

 

Pictures appear

The WHISPER function is working.

 

dark.

Select NORMAL for the WHISPER item in the SETUP

22, 32

 

menu.

 

 

The lamp is approaching the end of its product

 

 

lifetime.

52

 

Replace the lamp.

 

 

Either the focus and/or horizontal phase settings are

 

 

not properly adjusted.

16, 27

Pictures appear

Adjust the focus using the focus ring, and/or H PHASE

 

blurry.

using the menu function.

 

 

The lens is dirty or misty.

55

 

Clean the lens referring to the section “Caring for the lens”.

 

 

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Contents of package Fastening the lens coverReplacing the filter cover for bottom-up use Part names ProjectorHOT 12 HOTRemote control Control panelSetting up ArrangementOn a horizontal surface Suspended from the ceilingArrangement Connecting your devices VCR/DVD playerMonitor Connecting your devices About Plug-and-Play capabilityConnecting power supply Using the security slotSecurity slot Remote control About the remote control signalPutting batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Selecting an input signal For a PC signal  For an Hdmi signalAdjusting the projectors elevator Adjusting the zoom and focusFocus ring Using the automatic adjustment feature Adjusting the positionAuto button Using the magnify feature Correcting the keystone distortionsKeystone button Freezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function Reset buttonEasy Menu Advanced MenuPicture Mode AspectAuto KeystoneEasy Menu Using the / buttons switches the gamma mode Picture MenuLight ó Dark Strong ó WeakUsing the / buttons switches the color temperature mode Picture MenuColor Temp Enter button, the pattern changes as belowMY Memory LOAD1, LOAD2, LOAD3, LOAD4SAVE1, SAVE2, SAVE3, SAVE4 Image Menu Over ScanPosition Phase Auto AdjustImage Menu SizeInput Menu ProgressiveVideo NR Color SpaceInput Menu Video FormatHdmi Frame LockResolution Setup Menu Setup Menu Standby ModeVolume Audio MenuAudio Hdmi AudioScreen Menu BlankScreen Menu Start UPMyScreen Capturing error has occurred. Please try again MyScreen registration is finishedMessage Template Allocated to the Template function is pressed DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2 Test Pattern ó DOT-LINE1Option Menu Auto SearchAuto on Option Menu Auto OFFLamp Time Service MY ButtonMY Source FanspeedGhost Filter MessageFactory Reset KEY LockRemote Freq InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function If you have forgotten your PasswordTurning on the MyScreen Password Setting the PasswordUsing the PIN Lock Function Turning the Password offDescription Security Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off BOXUsing the MY Text Password function Writing the MY TextDisplaying the MY Text On nextDescription Turning on the MY Text Password Closed Caption Menu DisplayMode ChannelMaintenance Case of replacement by yourselfLamp Type number DT00821 Replacing the lampLamp warning LampCleaning the air filter Air filterType number MU03602 Filter coverMaintenance Troubleshooting There is no input signalAn improper signal is input Internal temperature is risingRegarding the indicator lamps Resetting all settings Regarding the indicator lampsShutting the projector down Electrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Play monitorSpecifications SpecificationAir filter MU03602
Top Page Image Contents