Apple CPX3 manual Maintenance

Page 55
WARNING ►Before caring, make sure the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and/or malfunction to the projector.
• Do not put anything containing water, cleaners or chemicals near the projector.
• Do not use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc.
►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard objects.
55
After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Other care
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of handling.

Maintenance

Image 55
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content Fastening the lens cover Contents of packageReplacing the filter cover for bottom-up use 12 HOT Part namesProjector HOTControl panel Remote controlSuspended from the ceiling Setting upArrangement On a horizontal surfaceArrangement VCR/DVD player Connecting your devicesMonitor About Plug-and-Play capability Connecting your devicesUsing the security slot Connecting power supplySecurity slot About the remote control signal Remote controlPutting batteries Using as a simple PC mouse & keyboard Changing the frequency of remote control signalSTANDBY/ON button Power indicator Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal Operating For an Hdmi signal Searching an input signalSelecting an input signal  For a PC signalAdjusting the zoom and focus Adjusting the projectors elevatorFocus ring Adjusting the position Using the automatic adjustment featureAuto button Correcting the keystone distortions Using the magnify featureKeystone button Blank button Freezing the screenTemporarily blanking the screen Freeze buttonAdvanced Menu Using the menu functionReset button Easy MenuKeystone Picture ModeAspect AutoEasy Menu Strong ó Weak Using the / buttons switches the gamma modePicture Menu Light ó DarkEnter button, the pattern changes as below Using the / buttons switches the color temperature modePicture Menu Color TempLOAD1, LOAD2, LOAD3, LOAD4 MY MemorySAVE1, SAVE2, SAVE3, SAVE4 Over Scan Image MenuPosition Size PhaseAuto Adjust Image MenuColor Space Input MenuProgressive Video NRFrame Lock Input MenuVideo Format HdmiResolution Setup Menu Standby Mode Setup MenuHdmi Audio VolumeAudio Menu AudioBlank Screen MenuStart UP Screen MenuMyScreen MyScreen registration is finished Capturing error has occurred. Please try againMessage Test Pattern ó DOT-LINE1 TemplateAllocated to the Template function is pressed  DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2Auto Search Option MenuAuto on Auto OFF Option MenuLamp Time Fanspeed ServiceMY Button MY SourceFilter Message GhostInformation Factory ResetKEY Lock Remote FreqSecurity Using Security FeaturesInputting the Password Changing the PasswordSetting the Password Using the MyScreen Password FunctionIf you have forgotten your Password Turning on the MyScreen PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off Description SecurityIf you have forgotten your PIN Code Turning Off the PIN Lock FunctionSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function BOX Setting the Transition Detector offOn next Using the MY Text Password functionWriting the MY Text Displaying the MY TextDescription Turning on the MY Text Password Channel Closed Caption MenuDisplay ModeType number DT00821 Replacing the lamp MaintenanceCase of replacement by yourself LampLamp Lamp warningFilter cover Cleaning the air filterAir filter Type number MU03602Maintenance Internal temperature is rising TroubleshootingThere is no input signal An improper signal is inputRegarding the indicator lamps Regarding the indicator lamps Resetting all settingsShutting the projector down Input changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workPlay monitor Color settings are not correctly adjustedColor Space setting is not suitable Not properly adjustedSpecification SpecificationsAir filter MU03602