Apple CPX3 manual Input Menu, Video Format, Hdmi, Frame Lock, Computer

Page 29

INPUT Menu

INPUT Menu (continued)

Item

Description

Set the video format for the s-video port and video port.

(1)Use the ◄/► buttons to select the input port.

(2)Using the ▲/▼ buttons switches the mode for video format.

VIDEO FORMAT	AUTO ó NTSC ó PAL ó SECAM
	N-PAL ó M-PAL ó NTSC4.43

•This item is performed only for a video signal from the VIDEO port or the S-VIDEO port.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal.

Using the ▲/▼ cursor buttons changes the HDMI signal mode.

AUTO ó NORMAL ó ENHANCED

	HDMI			Feature

			AUTO	Selecting the optimum mode automatically.
			NORMAL	Suitable for DVD signals (16-235)
			ENHANCED	Suitable for VGA signals (0-255)
		• If the contrast of the screen image is too strong or too weak, try
		finding a more suitable mode.
		Set the frame lock function on/off for each port.
		(1) Use the ▲/▼ buttons to select one of
		following ports.
			COMPUTER (IN)1 ó COMPUTER (IN)2 ó HDMI
			QUIT
	FRAME LOCK	(2) Use the ◄/► buttons to turns the frame
	FRAME LOCK	lock function on/off .
			TURN ON ó TURN OFF
		• This item can be performed only on a signal
		with a vertical frequency of 49 to 51 Hz, 59 to 61 Hz.
		• When the TURN ON is selected, a moving pictures are displayed more smoothly.
		• This function may cause a certain degradation of the picture. In
		such a case, please select the TURN OFF.
		Set the computer input signal type for the ports of COMPUTER IN1 and COMPUTER IN2.
		(1) Use the ◄/► buttons to select a COMPUTER port to be set.
			COMPUTER (IN)1 ó COMPUTER (IN)2
		(2) Use the ▲/▼ buttons to select the computer input signal type.
	COMPUTER IN		AUTO ó SYNC ON G OFF
	COMPUTER IN	Sync on Green signal can be supported, if AUTO is selected.
		Sync on Green signal can be supported, if AUTO is selected.
		• When the AUTO is selected, the picture may be distorted with certain
		input signals. In such a case, remove the signal connector first and
		select SYNC ON G OFF on the menu, and then reconnect the signal.
		• Component signal can be supported through COMPUTER IN1
		port, if AUTO is selected for the COMPUTER IN1 port.

(continued on next page)

29

Image 29

Contents Trademark acknowledgment About this manualThank you for purchasing this projector Content Replacing the filter cover for bottom-up use Contents of packageFastening the lens cover Projector Part namesHOT 12 HOTControl panel Remote controlArrangement Setting upOn a horizontal surface Suspended from the ceilingArrangement Monitor Connecting your devicesVCR/DVD player About Plug-and-Play capability Connecting your devicesSecurity slot Connecting power supplyUsing the security slot Putting batteries Remote controlAbout the remote control signal Using as a simple PC mouse & keyboard Changing the frequency of remote control signalTurning on the power Power on/offTurning off the power STANDBY/ON button Power indicatorSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundSelecting an input signal Searching an input signal For a PC signal  For an Hdmi signalFocus ring Adjusting the projectors elevatorAdjusting the zoom and focus Auto button Using the automatic adjustment featureAdjusting the position Keystone button Using the magnify featureCorrecting the keystone distortions Temporarily blanking the screen Freezing the screenFreeze button Blank buttonReset button Using the menu functionEasy Menu Advanced MenuAspect Picture ModeAuto KeystoneEasy Menu Picture Menu Using the / buttons switches the gamma modeLight ó Dark Strong ó WeakPicture Menu Using the / buttons switches the color temperature modeColor Temp Enter button, the pattern changes as belowSAVE1, SAVE2, SAVE3, SAVE4 MY MemoryLOAD1, LOAD2, LOAD3, LOAD4 Position Image MenuOver Scan Auto Adjust PhaseImage Menu SizeProgressive Input MenuVideo NR Color SpaceVideo Format Input MenuHdmi Frame LockResolution Setup Menu Standby Mode Setup MenuAudio Menu VolumeAudio Hdmi AudioBlank Screen MenuMyScreen Screen MenuStart UP Message Capturing error has occurred. Please try againMyScreen registration is finished Allocated to the Template function is pressed  TemplateDOT-LINE4 ó DOT-LINE3 ó DOT-LINE2 Test Pattern ó DOT-LINE1Auto on Option MenuAuto Search Lamp Time Option MenuAuto OFF MY Button ServiceMY Source FanspeedFilter Message GhostKEY Lock Factory ResetRemote Freq InformationInputting the Password Using Security FeaturesChanging the Password SecurityIf you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Setting the PasswordTurning the Password off Using the PIN Lock FunctionDescription Security Registering the PIN CodeIf you have forgotten your PIN Code Turning Off the PIN Lock FunctionTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password BOX Setting the Transition Detector offWriting the MY Text Using the MY Text Password functionDisplaying the MY Text On nextDescription Turning on the MY Text Password Display Closed Caption MenuMode ChannelCase of replacement by yourself MaintenanceLamp Type number DT00821 Replacing the lampLamp Lamp warningAir filter Cleaning the air filterType number MU03602 Filter coverMaintenance There is no input signal TroubleshootingAn improper signal is input Internal temperature is risingRegarding the indicator lamps Shutting the projector down Resetting all settingsRegarding the indicator lamps Signal cables are not correctly connected Electrical power cord is not pluggedSignal source does not correctly work Input changeover settings are mismatchedColor Space setting is not suitable Color settings are not correctly adjustedNot properly adjusted Play monitorAir filter MU03602 SpecificationsSpecification