BenQ MX764 Using the USB cable to display computer content, Using the broadcasting function

Page 52

Using the broadcasting function

When it comes to 1:N LAN Display, there are two ways to do this function:

1.By TCP/IP (support up to 8 projectors, original design)

2.By Multicast (support up to 255 projectors, this new design)

You can select channel 1, 2, 3, 4, 5, 6... 25 with showing the correspondent IP (gray out). There are 1~25 channels (25 IPs) for you to select freely:

239.192.19.21~239.192.19.45

If the channel is fixed at emergency channel, when projector detects image coming in from this channel, it will project this image automatically. There is no need to switch sources manually.

To activate this function:

The function requires special version of the QPresenter. Please download it from your User Manuel CD.

1.Go to the SYSTEM SETUP: Advanced > Network Settings menu after opening the OSD menu system. Press MODE/ENTER.

2.Press to highlight Broadcasting and press / to select On.

3.Open the Advanced Settings page in the QPresenter.

4.Click Yes in the Activating Broadcasting row and click Apply.

Or

1.Open the Projector Network Display System and go to the Basic page.

2.Click ON in the Broadcasting row and select a channel using the drop-down list.

3.Open the Advanced Settings page in the QPresenter.

4.Click Yes in the Activating Broadcasting row and click Apply.

• This function is only available when the Network Display source is selected.

•The minimum system requirement for your computer is Intel Core 2 Duo 2.4GHz CPU, 2G DDR.

Using the Projection Login Code

This function is designed to ensure network display through the correct projector. To toggle this function:

1.Go to the SYSTEM SETUP: Advanced > Network Settings menu after opening the OSD menu system. Press MODE/ENTER.

2.Press to highlight Projection Log In Code and press / to select On or Off. When this function is on, the projector generates a random 4-digit code in the upper right corner when you switch the source to Network Display. You need to key in this 4-digit code in the QPresenter when connecting to the projector.

Using the USB cable to display computer content

1.Take a USB cable and connect one end to your computer and the other end to the USB min B port on the projector.

2.Press SOURCE and select USB Display in the source bar.

3.Go to My Computer on you PC and double-click the BenQ QPresenter icon.

4.The projector automatically displays the content in your computer.

52 Operation

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Welcome MX763/MX764 Digital ProjectorTable of contents Safety Instructions Important safety instructionsRefer servicing to qualified service personnel Safety Instructions Confined. Allow at least 50 cm clearance Ceiling mounting the projector Projector features IntroductionShipping contents Front/upper side Projector exterior viewRear/lower side Controls and functions Remote control 22 12. NetworkAuto Keystone/Arrow buttons / Up DownVOLUME+/VOLUME- Adjusts the sound level Mute Operating the Laser pointerMIC/VOL + Numeric buttonsRemote control effective range Replacing the remote control batteriesPositioning your projector Choosing a locationFront Table Front CeilingProjection dimensions Obtaining a preferred projected image sizeWhen the projector position is fixed Shifting the projection lensConnection ConnectionConnecting video source devices Connecting audioPlaying sound through the projector Audio Settings Microphone Volume menuAbout the microphone input Connection Operation Starting up the projectorAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarityCorrecting keystone Using the menus Use / to highlight the System Setup Basic menuUsing a security cable lock Utilizing the password functionSetting a password Securing the projectorEntering the password recall procedure If you forget the passwordChanging the password Disabling the password function Switching input signal Changing Color SpaceMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Using Wall Color Selecting a picture modeSetting the User 1/User 2 mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes RED To cancel the timer, perform the following steps Setting the presentation timerTop-Left Bottom-Left Top-Right Bottom-Right Freezing the image Remote paging operationsHiding the image To activate the High Altitude Mode Using the remote controlLocking control keys Operating in a high altitude environmentAdjusting the sound Adjusting the sound levelAdjusting the microphone volume Turning off the Power On/Off Ring ToneControlling the projector through a LAN environment Cable connectionIf you are in a Dhcp environment If you are in a non-DHCP environmentSetting the Infrastructure mode Wireless connectionHighlight Wireless LAN and press MODE/ENTER Operation Controlling the projector remotely through a web browser Operation Operation Iii Press Exit to go back to the remote network operation Operation Operation Using the web control lock Using QPresenter Downloading and installing QPresenterDisplaying images through QPresenter Operation Operation Using the broadcasting function Using the USB cable to display computer contentUsing the Projection Login Code Presenting from a USB Reader Using the USB Camera Shutting down the projectorDirect power off Menu operation Menu systemMain menu Sub-menu Options BasicSystem Setup Basic AdvancedMain menu Sub-menu Options System Setup Advanced DhcpDescription of each menu Picture Mode TemperatureManagement Save Settings Display menu Picture menu Function Description TeachingTimer Function Description Quick AutoSearch Color SpaceSettings OperationAdvanced menu Security Settings Description RemoteReceiver Panel KeySystem Setup Advanced menu Function Description Baud RateTest Pattern ClosedReset All Information menu Function DescriptionNetwork CurrentMaintenance Care of the projectorSetting Lamp Mode as Economic Lamp informationGetting to know the lamp hour Extending lamp lifeTiming of replacing the lamp Status MessageReplacing the lamp Ensure the handle is fully laid flat and locked in place Resetting the lamp timer Tighten the screws that secure the lamp coverIndicators Light Status & Description Power eventsLamp events Thermal eventsTroubleshooting Cause RemedySpecifications Projector specificationsDimensions Ceiling mount installationTiming chart Supported timing for PC inputSupported timing for Hdmi Hdcp input Supported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsWarranty and Copyright information Limited warrantyCopyright Disclaimer
Top Page Image Contents