LG Electronics AVS2400 owner manual Set the options of the Network menu and press button

Page 22

22Installation

7. Set the options of the Network menu and press button.

3

Installation

•DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address is assigned automatically. If you select this option, IP address, Subnet Mask and Default Gateway options cannot be set.

•IP Address: Enter the static IP address of the device.

•Subnet Mask: Enter the subnet mask IP address.

•Default Gateway: Enter the default gateway IP address.

•Hostname: Enter the hostname.

•DNS Servers: Enter the IP address to configure as DNS servers. (The IP addresses of the DNS server are separated by blanks.)

•Name Search Domains: Enter the domain names to search when resolving hostnames.

•Network Speed: Select the speed and duplex capability of your network. (If the quality of the video and audio call is low, change the network speed to low value.)

•NTP Server Hostname: Enter the hostname or IP address of the NTP server.

8. Set the options of the Audio menu and press

button.

Image 22

Contents Video Conference Monitor Safety Information Regulatory Information FCC PartLamps Contain Mercury, Dispose Properly Disposal of your old applianceEEE Compliance with Directive. for Turkey only Or moisture, does not operate normally, or has been droppedOn Safety On InstallationOn Disposal On CleaningOn Repacking Lifting and moving the VCSContents Mode settings Customizing OSD settingsMenu settings SpecificationsFeatures IntroductionVCS Body Remote control and batteries UnpackingOverview Front of the VCSRear of the VCS Power cord Inlet AC in Connects the power plugOSD lock / unlock function Remote Control Battery InstallationConnections Attaching the standUsing the Kensington security system optional Disassembling the standAudio Connecting to a PCVideo Hdmi connectionSUB connection Connecting Network Connecting PowerConnecting Headphones Connecting a Microphone Adjusting the angle of the Monitor and camera Attaching the back coverInitial settings for VCS Default administrator password is 1 2 3Set the options of the Identification menu and press Set the options of the Network menu and press button Installation Main screen overview Icon Accessing the System Menu User Preferences setup Access User Preferences from which you can do the followingAdministration Using the Remote Control Administrator PreferencesAccessing Administrative Features Administration from a Web BrowserInstallation Configuring Call Preferences Controlling Remote Administration Configuring Security PreferencesAdmission Control Changing the Administrator Password Setting the User PasswordConfiguring Audio Behaviors Viewing Recent Configuration ChangesConfiguring Audio Codec Order Adjusting Audio Levels Administrator Preferences AudioTesting Primary Audio Output Selecting the Active MicrophoneSpecifying the Hostname and Domain Name Service DNS Servers Configuring Network UsageSpecifying a Locally Configured IP Address Specifying Network SpeedSpecifying an NTP Server Specifying a Vlan TagEnabling IPv6 Addressing Enabling Network Address Translation NAT Restricting Reserved PortsCall Type Number of Required UDP and TCP Ports Configuring Quality of ServiceConfiguring LifeSize Transit Preferences Call Type Number of Required UDP PortsDisabling Access to the Local Directory Populating the Corporate DirectoryReading from an Ldap Server Ldap preferences are not configuredConfiguring Auto Discovery Server and receive data was successfulConfiguring Communications Preferences Enabling TelepresenceReceiving Presentations Configuring Dialing OptionsSpecifying H.323 Settings Virtual Link Data SharingConfiguring SIP Settings Enabling H.460 Support for H.323 CallsConfiguring Appearance Preferences Video Layout PreferencesLocking the Camera Presets Configuring Video BehaviorsConfiguring Display Preferences Controlling the Camera Use by Far End UsersAdjusting the MTU of Video Packets Configuring System SettingsAdjusting Video Encoder Quality Selecting Priority of Quality Metrics for Source VideoNavigate to Administrator Preferences System License Keys Rebooting the System automaticallyManually Setting System Date and Time Identifying the SystemNavigate to Preferences System License Keys Installing a License Key ManuallyHours to complete Using Diagnostics Preferences and Tools Restoring Default SettingsUsing Network Utilities Using Camera Diagnostic PreferencesRebooting the System Do Not Disturb Using Advanced Directory Features Exclusive Web Administration FeaturesSaving and Restoring a System Configuration Downloading Call History Copying Screen Text to the ClipboardUpgrading System Software Troubleshooting Upgrade Failures Managing Calls from the Web Administration InterfaceUpgrading your System Software Upgrade Error Codes Placing a Call Near End Video QualityPlacing a Call from the Redial List To place a call from the directory, follow these steps Placing a Call from the DirectoryManually Dialing a Number from the Main Screen Manually Dialing a Video NumberAnswering or Rejecting a Call Manually Dialing a Voice NumberCall Status Using System Do Not DisturbManaging a Call Caller IDManaging PIP Hiding or Showing User Interface ElementsManaging Audio Managing Video LayoutFar End Video Near End Video Screen Layout Far End VideoNear End Video Far End Video Near End Video During aEnding a Call from the Call Manager Viewing Call StatisticsEnding a Call To hang up a call, press OK again to end the callRemoving an Entry from the Redial List Managing the Redial ListLocking and Unlocking Entries in the Redial List Adding a Redial List Entry to the DirectoryCopying an Entry from the Corporate to the Local Directory Managing the DirectoryAdding an Entry to the Local Directory Removing an Entry from the Local DirectoryEditing an Entry in the Local Directory Adding an Entry to the Meetings DirectoryMenu settings Customizing OSD settingsNavigation button overview Supported Input Description Mode settings Please contact the service center Check the power cable is connected correctlyCheck the main power switch is turned on Check the input voltage is correctYou can not make a call Configure your display againConnected. Check the signal cable and try again Appears on the screenSpecifications Diagnostic logging 280 x720p @ 25 to 30 fps ResolutionDo Not Disturb mode Directory Service H.350Admin and User level password Save, Lock, Remove Redial List featuresBackup and Restore capability Ability to disable HTTP, SSH and Telnet servicesWarranty Card Appendix