LG Electronics AVS2400 owner manual Icon

Page 25

Installation 25

Icon

Description

Indicates a video call in progress. An orange circle appears to the right of the video icon to indicate a video call in progress.

Indicates a voice call in progress. An orange circle appears to the right of the voice icon to indicate a voice call in progress.

Indicates that the communication subsystem is initializing. If this icon reappears after the system has booted, a problem has occurred and rebooting the system is necessary.

Indicates that the system is initializing. When the system is initializing, functionality on the main screen is disabled and no entries appear in the REDIAL list. This icon also appears when a new device is connected to the system after the system boots and disappears when the device is ready. If the icon persists, a problem has occurred and rebooting the system is necessary.

Indicates that the system does not have an active microphone. Contact your administrator.

Identifies the network status, as follows:

• - The indicator turns green when the network is connected.

 

NOTE

Network Status

If the LAN cable is disconnected during operation, the indicator stays green. It will change

to the red indicator after rebooting the system.

 

 

 

 

•

- The indicator turns yellow when the network is progressing.

 

 

•

- The indicator turns red, if the network is disconnected and then the system is

 

 

rebooted.

 

 

 

 

 

 

This yellow indicator warns you when the system temperature is above normal operating

System

 

temperature. The system adjusts fan speed automatically to cool itself.

 

 

 

 

Overheating

 

This red indicator warns that the system is overheated and approaching the maximum allowed

 

 

 

 

operating temperature and will automatically reboot after reaching it.

 

 

 

 

 

When SIP is configured as the protocol for placing calls, this indicator identifies the registration

SIP server

status of the system with the SIP server as follows:

in progress

 

(yellow indicator)

registration

 

 

 

 

status

registration failed

(red indicator)

 

 

 

 

Contact your administrator.

 

 

 

H.323

Indicates the registration status of the system with a H.323 gatekeeper as follows:

in progress

 

(yellow indicator)

gatekeeper

 

 

 

 

registration

registration failed

(red indicator)

status

Contact your administrator.

 

 

NOTE

3

Installation

When your system is idle, a screen saver appears on the display, or the screen is black. An incoming call or pressing any button on the remote control automatically invokes the system.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Video Conference Monitor Regulatory Information FCC Part Safety InformationEEE Compliance with Directive. for Turkey only Disposal of your old applianceLamps Contain Mercury, Dispose Properly Or moisture, does not operate normally, or has been droppedOn Installation On SafetyOn Repacking On CleaningOn Disposal Lifting and moving the VCSContents Menu settings Customizing OSD settingsMode settings SpecificationsIntroduction FeaturesUnpacking VCS Body Remote control and batteriesFront of the VCS OverviewRear of the VCS Power cord Inlet AC in Connects the power plugOSD lock / unlock function Battery Installation Remote ControlAttaching the stand ConnectionsDisassembling the stand Using the Kensington security system optionalVideo Connecting to a PCAudio Hdmi connectionSUB connection Connecting Power Connecting NetworkConnecting a Microphone Connecting HeadphonesAttaching the back cover Adjusting the angle of the Monitor and cameraDefault administrator password is 1 2 3 Initial settings for VCSSet the options of the Identification menu and press Set the options of the Network menu and press button Installation Main screen overview Icon Accessing the System Menu Access User Preferences from which you can do the following User Preferences setupAccessing Administrative Features Administrator PreferencesAdministration Using the Remote Control Administration from a Web BrowserInstallation Configuring Call Preferences Controlling Remote Administration Configuring Security PreferencesAdmission Control Setting the User Password Changing the Administrator PasswordConfiguring Audio Behaviors Viewing Recent Configuration ChangesConfiguring Audio Codec Order Testing Primary Audio Output Administrator Preferences AudioAdjusting Audio Levels Selecting the Active MicrophoneSpecifying a Locally Configured IP Address Configuring Network UsageSpecifying the Hostname and Domain Name Service DNS Servers Specifying Network SpeedSpecifying an NTP Server Specifying a Vlan TagEnabling IPv6 Addressing Restricting Reserved Ports Enabling Network Address Translation NATConfiguring LifeSize Transit Preferences Configuring Quality of ServiceCall Type Number of Required UDP and TCP Ports Call Type Number of Required UDP PortsPopulating the Corporate Directory Disabling Access to the Local DirectoryConfiguring Auto Discovery Ldap preferences are not configuredReading from an Ldap Server Server and receive data was successfulEnabling Telepresence Configuring Communications PreferencesSpecifying H.323 Settings Configuring Dialing OptionsReceiving Presentations Virtual Link Data SharingEnabling H.460 Support for H.323 Calls Configuring SIP SettingsVideo Layout Preferences Configuring Appearance PreferencesConfiguring Display Preferences Configuring Video BehaviorsLocking the Camera Presets Controlling the Camera Use by Far End UsersAdjusting Video Encoder Quality Configuring System SettingsAdjusting the MTU of Video Packets Selecting Priority of Quality Metrics for Source VideoManually Setting System Date and Time Rebooting the System automaticallyNavigate to Administrator Preferences System License Keys Identifying the SystemNavigate to Preferences System License Keys Installing a License Key ManuallyHours to complete Restoring Default Settings Using Diagnostics Preferences and ToolsUsing Network Utilities Using Camera Diagnostic PreferencesRebooting the System Do Not Disturb Using Advanced Directory Features Exclusive Web Administration FeaturesSaving and Restoring a System Configuration Downloading Call History Copying Screen Text to the ClipboardUpgrading System Software Troubleshooting Upgrade Failures Managing Calls from the Web Administration InterfaceUpgrading your System Software Upgrade Error Codes Placing a Call Near End Video QualityPlacing a Call from the Redial List Manually Dialing a Number from the Main Screen Placing a Call from the DirectoryTo place a call from the directory, follow these steps Manually Dialing a Video NumberManually Dialing a Voice Number Answering or Rejecting a CallManaging a Call Using System Do Not DisturbCall Status Caller IDManaging Audio Hiding or Showing User Interface ElementsManaging PIP Managing Video LayoutNear End Video Far End Video Screen Layout Far End VideoFar End Video Near End Video Near End Video During aEnding a Call Viewing Call StatisticsEnding a Call from the Call Manager To hang up a call, press OK again to end the callLocking and Unlocking Entries in the Redial List Managing the Redial ListRemoving an Entry from the Redial List Adding a Redial List Entry to the DirectoryAdding an Entry to the Local Directory Managing the DirectoryCopying an Entry from the Corporate to the Local Directory Removing an Entry from the Local DirectoryAdding an Entry to the Meetings Directory Editing an Entry in the Local DirectoryMenu settings Customizing OSD settingsNavigation button overview Supported Input Description Mode settings Check the main power switch is turned on Check the power cable is connected correctlyPlease contact the service center Check the input voltage is correctConnected. Check the signal cable and try again Configure your display againYou can not make a call Appears on the screenSpecifications Do Not Disturb mode 280 x720p @ 25 to 30 fps ResolutionDiagnostic logging Directory Service H.350Backup and Restore capability Save, Lock, Remove Redial List featuresAdmin and User level password Ability to disable HTTP, SSH and Telnet servicesWarranty Card Appendix
Top Page Image Contents