LG Electronics AVS2400 owner manual User Preferences setup

Page 27

Installation 27

User Preferences setup

Access User Preferences from which you can do the following:

3

Installation

•Appearance: Change the appearance of the user interface, including the language, screen saver and screen saver timeout, system sleep timeout, and the duration of time that the user interface appears after a call connects.

•Backgrounds: Change the background image or color.

•Calls: Choose the method the system uses for answering calls. For more information, refer to “Answering or Rejecting a Call” on page 58.

•Audio: Adjust settings for audio input and output devices connected to the system. For more information, refer to “Managing Audio” on page 60.

•Diagnostics: Access diagnostic tools to adjust camera settings and reboot the system. You can use the camera diagnostic preferences to adjust camera brightness and white balance and correct for some types of flicker that may appear in the video.

-- Adjusting Camera Brightness: Camera brightness refers to the amount of light received through the lens of the camera. You can improve dim scenes by manually adjusting the camera brightness.

NOTE

Camera has auto-exposure algorithm. If the exposure is already high, brightness will not change.

-- Adjusting Camera White Balance: Adjust the white balance when video color appears to be unbalanced. White balance is affected by the type of light source.

-- Adjusting the Camera Anti-Flicker Preference: Lights powered by a 50 Hz power source can produce a flicker that the camera captures and transmits to the system. If you are using lights powered by a 50 Hz power source and observe a flicker in the video displayed in your system, select the 60 Hz option. The default option is Auto.

NOTE

Administrator can set the password not to access these preferences.

Image 27

Contents Video Conference Monitor Regulatory Information FCC Part Safety InformationOr moisture, does not operate normally, or has been dropped Disposal of your old applianceEEE Compliance with Directive. for Turkey only Lamps Contain Mercury, Dispose ProperlyOn Installation On SafetyLifting and moving the VCS On CleaningOn Repacking On DisposalContents Specifications Customizing OSD settingsMenu settings Mode settingsIntroduction FeaturesUnpacking VCS Body Remote control and batteriesFront of the VCS OverviewPower cord Inlet AC in Connects the power plug Rear of the VCSOSD lock / unlock function Battery Installation Remote ControlAttaching the stand ConnectionsDisassembling the stand Using the Kensington security system optionalHdmi connection Connecting to a PCVideo AudioSUB connection Connecting Power Connecting NetworkConnecting a Microphone Connecting HeadphonesAttaching the back cover Adjusting the angle of the Monitor and cameraDefault administrator password is 1 2 3 Initial settings for VCSSet the options of the Identification menu and press Set the options of the Network menu and press button Installation Main screen overview Icon Accessing the System Menu Access User Preferences from which you can do the following User Preferences setupAdministration from a Web Browser Administrator PreferencesAccessing Administrative Features Administration Using the Remote ControlInstallation Configuring Call Preferences Configuring Security Preferences Controlling Remote AdministrationAdmission Control Setting the User Password Changing the Administrator PasswordViewing Recent Configuration Changes Configuring Audio BehaviorsConfiguring Audio Codec Order Selecting the Active Microphone Administrator Preferences AudioTesting Primary Audio Output Adjusting Audio LevelsSpecifying Network Speed Configuring Network UsageSpecifying a Locally Configured IP Address Specifying the Hostname and Domain Name Service DNS ServersSpecifying a Vlan Tag Specifying an NTP ServerEnabling IPv6 Addressing Restricting Reserved Ports Enabling Network Address Translation NATCall Type Number of Required UDP Ports Configuring Quality of ServiceConfiguring LifeSize Transit Preferences Call Type Number of Required UDP and TCP PortsPopulating the Corporate Directory Disabling Access to the Local DirectoryServer and receive data was successful Ldap preferences are not configuredConfiguring Auto Discovery Reading from an Ldap ServerEnabling Telepresence Configuring Communications PreferencesVirtual Link Data Sharing Configuring Dialing OptionsSpecifying H.323 Settings Receiving PresentationsEnabling H.460 Support for H.323 Calls Configuring SIP SettingsVideo Layout Preferences Configuring Appearance PreferencesControlling the Camera Use by Far End Users Configuring Video BehaviorsConfiguring Display Preferences Locking the Camera PresetsSelecting Priority of Quality Metrics for Source Video Configuring System SettingsAdjusting Video Encoder Quality Adjusting the MTU of Video PacketsIdentifying the System Rebooting the System automaticallyManually Setting System Date and Time Navigate to Administrator Preferences System License KeysInstalling a License Key Manually Navigate to Preferences System License KeysHours to complete Restoring Default Settings Using Diagnostics Preferences and ToolsUsing Camera Diagnostic Preferences Using Network UtilitiesRebooting the System Do Not Disturb Exclusive Web Administration Features Using Advanced Directory FeaturesSaving and Restoring a System Configuration Copying Screen Text to the Clipboard Downloading Call HistoryUpgrading System Software Managing Calls from the Web Administration Interface Troubleshooting Upgrade FailuresUpgrading your System Software Upgrade Error Codes Near End Video Quality Placing a CallPlacing a Call from the Redial List Manually Dialing a Video Number Placing a Call from the DirectoryManually Dialing a Number from the Main Screen To place a call from the directory, follow these stepsManually Dialing a Voice Number Answering or Rejecting a CallCaller ID Using System Do Not DisturbManaging a Call Call StatusManaging Video Layout Hiding or Showing User Interface ElementsManaging Audio Managing PIPNear End Video During a Screen Layout Far End VideoNear End Video Far End Video Far End Video Near End VideoTo hang up a call, press OK again to end the call Viewing Call StatisticsEnding a Call Ending a Call from the Call ManagerAdding a Redial List Entry to the Directory Managing the Redial ListLocking and Unlocking Entries in the Redial List Removing an Entry from the Redial ListRemoving an Entry from the Local Directory Managing the DirectoryAdding an Entry to the Local Directory Copying an Entry from the Corporate to the Local DirectoryAdding an Entry to the Meetings Directory Editing an Entry in the Local DirectoryCustomizing OSD settings Menu settingsNavigation button overview Supported Input Description Mode settings Check the input voltage is correct Check the power cable is connected correctlyCheck the main power switch is turned on Please contact the service centerAppears on the screen Configure your display againConnected. Check the signal cable and try again You can not make a callSpecifications Directory Service H.350 280 x720p @ 25 to 30 fps ResolutionDo Not Disturb mode Diagnostic loggingAbility to disable HTTP, SSH and Telnet services Save, Lock, Remove Redial List featuresBackup and Restore capability Admin and User level passwordWarranty Card Appendix