LG Electronics AVS2400 owner manual Administrator Preferences, Accessing Administrative Features

Page 28

28Installation

Administrator Preferences

Administrator Preferences is protected by password and contains preferences for administrators only.

3

Installation

Accessing Administrative Features

You can manage your video communications system using the remote control or remotely using a web browser, telnet session, or secure shell (ssh) session.

Administration Using the Remote Control

To access administrator preferences for configuring the system using the remote control, follow these steps:

1. From the main screen of the user interface, press the button on the remote control to access the System Menu.

2.Select Administrator Preferences and press OK.

3.Enter the administrator password and press OK.

NOTE

The default administrator password is “1 2 3 4”. To change the administrator password, refer to “Changing the Administrator

Password” on page 32. If you enter an incorrect password, press the button on the remote control to clear the Login Attempt Failed message.

Administration from a Web Browser

To configure your system from a web browser, you must have Adobe Flash Player installed and configured on your web browser. You can download the Flash Player from www.adobe.com. Refer to the LifeSize Passport Release Notes for the supported Flash Player version. Release Notes are available from the Support page of www.lifesize.com.

By default, remote access to your system through a web browser is enabled. To disable remote access through a web browser, select Disabled for the HTTP preference in Administrator Preferences : Security : General.

Image 28

Contents Video Conference Monitor Safety Information Regulatory Information FCC PartDisposal of your old appliance EEE Compliance with Directive. for Turkey onlyLamps Contain Mercury, Dispose Properly Or moisture, does not operate normally, or has been droppedOn Safety On InstallationOn Cleaning On RepackingOn Disposal Lifting and moving the VCSContents Customizing OSD settings Menu settingsMode settings SpecificationsFeatures IntroductionVCS Body Remote control and batteries UnpackingOverview Front of the VCSRear of the VCS Power cord Inlet AC in Connects the power plugOSD lock / unlock function Remote Control Battery InstallationConnections Attaching the standUsing the Kensington security system optional Disassembling the standConnecting to a PC VideoAudio Hdmi connectionSUB connection Connecting Network Connecting PowerConnecting Headphones Connecting a MicrophoneAdjusting the angle of the Monitor and camera Attaching the back coverInitial settings for VCS Default administrator password is 1 2 3Set the options of the Identification menu and press Set the options of the Network menu and press button Installation Main screen overview Icon Accessing the System Menu User Preferences setup Access User Preferences from which you can do the followingAdministrator Preferences Accessing Administrative FeaturesAdministration Using the Remote Control Administration from a Web BrowserInstallation Configuring Call Preferences Controlling Remote Administration Configuring Security PreferencesAdmission Control Changing the Administrator Password Setting the User PasswordConfiguring Audio Behaviors Viewing Recent Configuration ChangesConfiguring Audio Codec Order Administrator Preferences Audio Testing Primary Audio OutputAdjusting Audio Levels Selecting the Active MicrophoneConfiguring Network Usage Specifying a Locally Configured IP AddressSpecifying the Hostname and Domain Name Service DNS Servers Specifying Network SpeedSpecifying an NTP Server Specifying a Vlan TagEnabling IPv6 Addressing Enabling Network Address Translation NAT Restricting Reserved PortsConfiguring Quality of Service Configuring LifeSize Transit PreferencesCall Type Number of Required UDP and TCP Ports Call Type Number of Required UDP PortsDisabling Access to the Local Directory Populating the Corporate DirectoryLdap preferences are not configured Configuring Auto DiscoveryReading from an Ldap Server Server and receive data was successfulConfiguring Communications Preferences Enabling TelepresenceConfiguring Dialing Options Specifying H.323 SettingsReceiving Presentations Virtual Link Data SharingConfiguring SIP Settings Enabling H.460 Support for H.323 CallsConfiguring Appearance Preferences Video Layout PreferencesConfiguring Video Behaviors Configuring Display PreferencesLocking the Camera Presets Controlling the Camera Use by Far End UsersConfiguring System Settings Adjusting Video Encoder QualityAdjusting the MTU of Video Packets Selecting Priority of Quality Metrics for Source VideoRebooting the System automatically Manually Setting System Date and TimeNavigate to Administrator Preferences System License Keys Identifying the SystemNavigate to Preferences System License Keys Installing a License Key ManuallyHours to complete Using Diagnostics Preferences and Tools Restoring Default SettingsUsing Network Utilities Using Camera Diagnostic PreferencesRebooting the System Do Not Disturb Using Advanced Directory Features Exclusive Web Administration FeaturesSaving and Restoring a System Configuration Downloading Call History Copying Screen Text to the ClipboardUpgrading System Software Troubleshooting Upgrade Failures Managing Calls from the Web Administration InterfaceUpgrading your System Software Upgrade Error Codes Placing a Call Near End Video QualityPlacing a Call from the Redial List Placing a Call from the Directory Manually Dialing a Number from the Main ScreenTo place a call from the directory, follow these steps Manually Dialing a Video NumberAnswering or Rejecting a Call Manually Dialing a Voice NumberUsing System Do Not Disturb Managing a CallCall Status Caller IDHiding or Showing User Interface Elements Managing AudioManaging PIP Managing Video LayoutScreen Layout Far End Video Near End Video Far End VideoFar End Video Near End Video Near End Video During aViewing Call Statistics Ending a CallEnding a Call from the Call Manager To hang up a call, press OK again to end the callManaging the Redial List Locking and Unlocking Entries in the Redial ListRemoving an Entry from the Redial List Adding a Redial List Entry to the DirectoryManaging the Directory Adding an Entry to the Local DirectoryCopying an Entry from the Corporate to the Local Directory Removing an Entry from the Local DirectoryEditing an Entry in the Local Directory Adding an Entry to the Meetings DirectoryMenu settings Customizing OSD settingsNavigation button overview Supported Input Description Mode settings Check the power cable is connected correctly Check the main power switch is turned onPlease contact the service center Check the input voltage is correctConfigure your display again Connected. Check the signal cable and try againYou can not make a call Appears on the screenSpecifications 280 x720p @ 25 to 30 fps Resolution Do Not Disturb modeDiagnostic logging Directory Service H.350Save, Lock, Remove Redial List features Backup and Restore capabilityAdmin and User level password Ability to disable HTTP, SSH and Telnet servicesWarranty Card Appendix