LG Electronics AVS2400 owner manual Installation

Page 23

Installation 23

•Active Microphone: Select the audio input to use for the active microphone.

-- Auto: Select this option to set the active microphone automatically. If you select this option, basically the unit selects the built-in microphone of the camera.

-- Microphone In: Set this option to use the connected external microphone.

-- Camera 1: Set this option to use the built-in microphone of the camera.

•Active Microphone Volume: Select the volume level for the active microphone.

•Video Call Audio Output: Select the location for audio output during video calls.

-- HD Out: Set this option to use the built-in speakers for audio output during video calls.

-- Line Out: Set this option to use the connected external headphone for audio output during video calls.

•Voice Call Audio Output: Select the location for audio output during voice calls.

-- HD Out: Set this option to use the built-in speakers for audio output during voice calls.

-- Line Out: Set this option to use the connected external headphone for audio output during voice calls.

•System Ringer: Choose ‘Enabled’ to enable the system ringer for the system.

•System Ringer Volume: Select the volume level for the system ringer.

•System Ringer Tone: Select the tone for the system ringer.

•Primary Audio Output Test: Select the test to perform. During testing you should hear test tone. If you want to stop the test, set it to off.

9.If you complete the initial configuration, press OK button to save the settings. VCS main menu will be displayed.

3

Installation

NOTE

•Additionally, refer to the on-screen instructions for each option setting.

•If you want to skip some option settings, press button.

Image 23

Contents Video Conference Monitor Regulatory Information FCC Part Safety InformationOr moisture, does not operate normally, or has been dropped Disposal of your old applianceEEE Compliance with Directive. for Turkey only Lamps Contain Mercury, Dispose ProperlyOn Installation On SafetyLifting and moving the VCS On CleaningOn Repacking On DisposalContents Specifications Customizing OSD settingsMenu settings Mode settingsIntroduction FeaturesUnpacking VCS Body Remote control and batteriesFront of the VCS OverviewOSD lock / unlock function Power cord Inlet AC in Connects the power plugRear of the VCS Battery Installation Remote ControlAttaching the stand ConnectionsDisassembling the stand Using the Kensington security system optionalHdmi connection Connecting to a PCVideo AudioSUB connection Connecting Power Connecting NetworkConnecting a Microphone Connecting HeadphonesAttaching the back cover Adjusting the angle of the Monitor and cameraDefault administrator password is 1 2 3 Initial settings for VCSSet the options of the Identification menu and press Set the options of the Network menu and press button Installation Main screen overview Icon Accessing the System Menu Access User Preferences from which you can do the following User Preferences setupAdministration from a Web Browser Administrator PreferencesAccessing Administrative Features Administration Using the Remote ControlInstallation Configuring Call Preferences Admission Control Configuring Security PreferencesControlling Remote Administration Setting the User Password Changing the Administrator PasswordConfiguring Audio Codec Order Viewing Recent Configuration ChangesConfiguring Audio Behaviors Selecting the Active Microphone Administrator Preferences AudioTesting Primary Audio Output Adjusting Audio LevelsSpecifying Network Speed Configuring Network UsageSpecifying a Locally Configured IP Address Specifying the Hostname and Domain Name Service DNS ServersEnabling IPv6 Addressing Specifying a Vlan TagSpecifying an NTP Server Restricting Reserved Ports Enabling Network Address Translation NATCall Type Number of Required UDP Ports Configuring Quality of ServiceConfiguring LifeSize Transit Preferences Call Type Number of Required UDP and TCP PortsPopulating the Corporate Directory Disabling Access to the Local DirectoryServer and receive data was successful Ldap preferences are not configuredConfiguring Auto Discovery Reading from an Ldap ServerEnabling Telepresence Configuring Communications PreferencesVirtual Link Data Sharing Configuring Dialing OptionsSpecifying H.323 Settings Receiving PresentationsEnabling H.460 Support for H.323 Calls Configuring SIP SettingsVideo Layout Preferences Configuring Appearance PreferencesControlling the Camera Use by Far End Users Configuring Video BehaviorsConfiguring Display Preferences Locking the Camera PresetsSelecting Priority of Quality Metrics for Source Video Configuring System SettingsAdjusting Video Encoder Quality Adjusting the MTU of Video PacketsIdentifying the System Rebooting the System automaticallyManually Setting System Date and Time Navigate to Administrator Preferences System License KeysHours to complete Installing a License Key ManuallyNavigate to Preferences System License Keys Restoring Default Settings Using Diagnostics Preferences and ToolsRebooting the System Using Camera Diagnostic PreferencesUsing Network Utilities Do Not Disturb Saving and Restoring a System Configuration Exclusive Web Administration FeaturesUsing Advanced Directory Features Upgrading System Software Copying Screen Text to the ClipboardDownloading Call History Upgrading your System Software Managing Calls from the Web Administration InterfaceTroubleshooting Upgrade Failures Upgrade Error Codes Placing a Call from the Redial List Near End Video QualityPlacing a Call Manually Dialing a Video Number Placing a Call from the DirectoryManually Dialing a Number from the Main Screen To place a call from the directory, follow these stepsManually Dialing a Voice Number Answering or Rejecting a CallCaller ID Using System Do Not DisturbManaging a Call Call StatusManaging Video Layout Hiding or Showing User Interface ElementsManaging Audio Managing PIPNear End Video During a Screen Layout Far End VideoNear End Video Far End Video Far End Video Near End VideoTo hang up a call, press OK again to end the call Viewing Call StatisticsEnding a Call Ending a Call from the Call ManagerAdding a Redial List Entry to the Directory Managing the Redial ListLocking and Unlocking Entries in the Redial List Removing an Entry from the Redial ListRemoving an Entry from the Local Directory Managing the DirectoryAdding an Entry to the Local Directory Copying an Entry from the Corporate to the Local DirectoryAdding an Entry to the Meetings Directory Editing an Entry in the Local DirectoryNavigation button overview Customizing OSD settingsMenu settings Supported Input Description Mode settings Check the input voltage is correct Check the power cable is connected correctlyCheck the main power switch is turned on Please contact the service centerAppears on the screen Configure your display againConnected. Check the signal cable and try again You can not make a callSpecifications Directory Service H.350 280 x720p @ 25 to 30 fps ResolutionDo Not Disturb mode Diagnostic loggingAbility to disable HTTP, SSH and Telnet services Save, Lock, Remove Redial List featuresBackup and Restore capability Admin and User level passwordWarranty Card Appendix