Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function:

1.Press TIMER SET UP on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ENTER to display the Presentation Timer page.

2.Press to highlight Timer period and decide the timer period by pressing / . The length of time can be set from 1 to 5 minutes in 1- minute increments and 5 to 240 minutes in 5-minute increments.

If the timer is already on, the timer will restart whenever the Timer period is reset.

3.Press to highlight Timer display and choose if you want the timer to show up on the screen by pressing / .

Presentation Timer

Timer period	15
Timer display		Always
Timer position		Top-Left
Timer counting direction		Count Down
On		Off

MENU Back

ENGLISH

Selection	Description
Always	Displays the timer on screen throughout the presentation time.

1 min/2 min/3 min	Displays the timer on screen in the last 1/2/3 minute(s).

Never	Hides the timer throughout the presentation time.

4.Press to highlight Timer position and set the timer position by pressing

/ .

Top-Left Bottom-Left Top-Right Bottom-Right

5.Press to highlight Timer counting direction and select your desired counting direction by pressing / .

5 min	5 min
5 min	5 min

Selection	Description
Count Up	Increases from 0 to the preset time.

Count Down	Decrease from the preset time to 0.

6.To activate the presentation timer, press and press / to select On and press MODE/ENTER.

7.A confirmation message displays. Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is On” displaying on the screen. The timer starts counting once the timer is turned on.

To cancel the timer, perform the following steps.

1.Go back to the Presentation Timer page.

2.Press and press / to highlight Off and press MODE/ENTER. A confirmation message displays.

3.Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is Off” displaying on the screen.

How to use the TIMER On key?

TIMER ON is a multi-functional key.

• If the presentation timer is off, pressing this key displays a confirmation message. You can decide whether to activate the timer or not by following the on-screen instruction.

• If the timer is already on, pressing this key displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the on-screen instruction.

EN-27