Mitsubishi Electronics XD95U user manual Security Settings, Setup menu Reset All Settings

Page 34

FUNCTION

(default setting/value)

5

 

.SYSTEM Advanced

Security Settings

 

SETUP: menu

Reset All Settings

 

6.

 

INFORMATION menu

Current System Status

 

DESCRIPTION (default setting/value)

Change password

You will be asked to enter the current password before changing to a new one.

Power on lock (Off)

See "Utilizing the password function" on page 19 for details.

Returns all settings to the factory preset values.

The following settings will still remain: Position, Phase, H. Size, User 1, User 2, Language, Projector Position, High Altitude Mode, Security Settings.

Source

Shows the current signal source.

Setting

Shows the selected mode in the PICTURE menu.

Resolution

Shows the native resolution of the input signal.

Color System

Shows input system format, NTSC, PAL, SECAM, or RGB.

Equivalent Lamp Hour

Displays the number of hours the lamp has been used.

EN-34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents XD95U Shock EN-3 Contents Important safeguards Compliance Notice of Industry Canada Front/upper side Projector exterior viewKensington Lock External control panelControls and functions ProjectorRemote control FreezeRemote control effective range Pull out the battery holderChoosing a location Positioning your projectorObtaining a preferred projected image size EN-12 Standard Layout of the projectorFront projection 169Connecting Video source devices Connecting a computerConnection To connect the projector to a Component Video source device Connecting a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceConnecting a composite Video source device To connect the projector to a composite Video source deviceOperation Starting up the projectorUsing the menus Use / to highlight the System Setup Basic menuIf you forget the password Utilizing the password functionSetting a password Entering the password recall procedureDisabling the password function Switching input signalChanging the password Enter the old passwordAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio Altering the images aspect ratioSetting the User 1/User 2 mode Selecting a picture modePicture modes for different types of signals Optimizing the imageFine-tuning the image quality in user modes 3D Color Management Using Wall ColorPress MODE/ENTER and the 3D Color Management page displays To cancel the timer, perform the following steps Setting the presentation timerHow to use the Timer On key? Locking control keys Setup Basic Panel Key Lock menu, and select On by pressingHiding the image Freezing the imagePersonalizing the projector menu display To activate the High Altitude ModeOperating in a high altitude environment Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system BasicAdvanced Description of each menu Blank Timer Presentation TimerAuto Power Off Timer ControllerSetup menu Reset All Settings Security SettingsCurrent System Status Maintenance Care of the projectorLamp information Setting Lamp mode as LowSetting Auto Power Off Getting to know the lamp hourProjector until the 2950 hour lamp warning appears Timing of replacing the lampLamp has been in operation for 3000 hours Replacing the lamp Spare lamp for XD95U VLT-XD95LPTighten the screw that secures the lamp Resetting the lamp timerRestart the projector Projector needs 90 seconds to cool down IndicatorsDown without the normal cooling down process Please contact your dealer for assistanceTroubleshooting Specifications Projector specificationsDimensions Timing chartSupported timing for Component-YPbPrinput Mitsubishi Electric Corporation
Top Page Image Contents