Mitsubishi Electronics XD95U Menu operation, Menu system, Main menu Sub-menu Options, Basic

Page 30

Menu operation

Menu system

Please note that the on-screen display (OSD) menus vary according to the signal type selected.

Main menu	Sub-menu	Options

	Wall Color	Off/Light Yellow/Pink/Light Green/Blue/
	Wall Color	Blackboard
		Blackboard
	Aspect Ratio	Auto/Real/4:3/16:9
1. DISPLAY	Keystone
1. DISPLAY	Position
	Position
	Phase
	H. Size
	Magnify

	Setting	PC source: Brightest/Presentation/Photo/Theater/User 1/User 2
	Setting	Video source: Standard/Theater/User 1/User 2/Dynamic
		Video source: Standard/Theater/User 1/User 2/Dynamic
	Color Mode	PC source: Brightest/Presentation/Photo/Theater
	Color Mode	Video source: Dynamic/Standard/Theater
		Video source: Dynamic/Standard/Theater
	Brightness
	Contrast
	Color
2. PICTURE	Tint
2. PICTURE	Sharpness
	BrilliantColor™		On/Off
	Color Temperature		T1/T2/T3/T4
		Primary Color	R/G/B/C/M/Y
	3D Color Management	Hue
	3D Color Management	Saturation
		Saturation
		Gain
	Save Settings
3. SOURCE	Quick Auto Search		On/Off

		Timer period	1~240 minutes
		Timer display	Always/1 min/2 min/3 min/Never
		Timer position	Top-Left/Bottom-Left/Top-Right/Bottom-
	Presentation Timer	Timer position	Right
	Presentation Timer		Right
		Timer counting	Count Down/Count Up
		direction	Count Down/Count Up
		direction
		On/Off
4.	Language




SYSTEM SETUP:
SYSTEM SETUP:
Basic


	Projector Position		Front Table/Rear Table
	Auto Power Off		Disable/5 min/10 min/15 min/20 min/25
	Auto Power Off		min/30 min
			min/30 min
	Blank Timer		Disable/5 min/10 min/15 min/20 min/25
	Blank Timer		min/30 min
			min/30 min
	Panel Key Lock		On/Off
	Timer Controller		Disable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12 hr
	Splash Screen		MITSUBISHI/Black/Blue

EN-30

Image 30

Contents XD95U Shock EN-3 Contents Important safeguards Compliance Notice of Industry Canada Front/upper side Projector exterior viewKensington Lock External control panelControls and functions ProjectorRemote control FreezeRemote control effective range Pull out the battery holderPositioning your projector Choosing a locationObtaining a preferred projected image size EN-12 Standard Layout of the projectorFront projection 169Connecting a computer Connecting Video source devicesConnection To connect the projector to a Component Video source device Connecting a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceConnecting a composite Video source device To connect the projector to a composite Video source deviceOperation Starting up the projectorUsing the menus Use / to highlight the System Setup Basic menuIf you forget the password Utilizing the password functionSetting a password Entering the password recall procedureDisabling the password function Switching input signalChanging the password Enter the old passwordAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio Altering the images aspect ratioSetting the User 1/User 2 mode Selecting a picture modePicture modes for different types of signals Optimizing the imageFine-tuning the image quality in user modes Using Wall Color 3D Color ManagementPress MODE/ENTER and the 3D Color Management page displays Setting the presentation timer To cancel the timer, perform the following stepsHow to use the Timer On key? Locking control keys Setup Basic Panel Key Lock menu, and select On by pressingHiding the image Freezing the imagePersonalizing the projector menu display To activate the High Altitude ModeOperating in a high altitude environment Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system BasicAdvanced Description of each menu Blank Timer Presentation TimerAuto Power Off Timer ControllerSecurity Settings Setup menu Reset All SettingsCurrent System Status Maintenance Care of the projectorLamp information Setting Lamp mode as LowSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Projector until the 2950 hour lamp warning appearsLamp has been in operation for 3000 hours Replacing the lamp Spare lamp for XD95U VLT-XD95LPResetting the lamp timer Tighten the screw that secures the lampRestart the projector Projector needs 90 seconds to cool down IndicatorsDown without the normal cooling down process Please contact your dealer for assistanceTroubleshooting Specifications Projector specificationsDimensions Timing chartSupported timing for Component-YPbPrinput Mitsubishi Electric Corporation