Descriptions and Functions

Front Panel

�

� � � � � � � ��

��

7.DSP / # (Digital Key Control) button - Cycles through the virtual EQ settings: CHURCH, DISCO, HALL, JAZZ, LIVE, STA- DIUM, THEATER and OFF. Select the one that best fits the movie or music you are playing.

NOTE: This option is not available on the 7.1 Input channel or when playing a DVD that is set to Dolby output. In Karaoke Mode, use this button to raise the key of the disc music.

About Karaoke Mode and Music Mode:

The DTX-9909K automatically enters Karaoke Mode when a microphone is connected to either of the microphone inputs on the front panel. When no microphones are connected, it will be in Music Mode.

8.2/7 Stereo / MIC CHANNEL - When a L/R stereo device is connected to the DTX-9909K, you can set it to send the audio to just the right and left speakers (2-channel) or to the surround sound speaker outputs (7-channel/5-channel).

In Music Mode, this button switches between 2-channel stereo mode and 7-channel stereo mode. In Karaoke Mode, this button switches between 2-channel stereo mode and the available 5-channel output configurations: L R C (left, right, Center), SL SR L R C (side-left, side-right, left, right, Center), SL SR C (side-left, side-right, center), L R (left, right), and C (center).

NOTE: when using either the 7-channel or Mic Channel modes, you must have speakers connected to the red & black surround speaker outputs on the rear panel.

About Karaoke Mode and Music Mode:

The DTX-9909K automatically enters Karaoke Mode when a microphone is connected to either of the microphone inputs on the front panel. When no microphones are connected, it will be in Music Mode.

9.TEST / F.B EX button - In Music Mode, press this button to perform a channel test. The channel test sends sound to each of the speaker outputs to test whether they are connected correctly. The display screen will show which speaker is being tested at a given time so that you can make sure the connections are correct.

In Karaoke Mode, use this button to cycle through the 3 levels of DSP feedback eliminator or to turn it off.

10.Zone2 button - Toggles between input channel Zone 1 and input channel Zone 2.

Zone 1 (Default main mode): Analog and digital input channels (DVD, AUX1, AUX2, AUX3, TV, AM/FM Tuner, 7.1 CH, OPT1, OPT2, COAX1, COAX2, COAX3, TAPE and CD)

Zone 2: Analog input channels (DVD, AUX1, AUX2, AUX3, TV, AM/FM Tuner, TAPE and CD)

NOTE: The DTX-9909K will always be set to ZONE 1 unless you press the ZONE2 button