VocoPro DTX-9909K Getting Started, About the Remote Control, Connecting the Power Cable

Page 11

Getting Started

About the Remote Control

The area between the remote control and the main unit must be clear of large obstacles.

Do not expose the remote control sensor to strong light- ing, especially an inverter type fluorescent lamp as this may cause the remote control to not function properly.

Installing Batteries in the Remote Control

1.Turn the remote control over and slide the battery com- partment cover off towards the direction of the arrow.

2.Insert the AA batteries, positioning them according to the polarity (+, --) markings on the inside of the battery compartment.

3.Close the battery compartment cover.

Connecting the Power Cable

Plug the supplied AC power cable into the AC inlet after all other connections are complete and then plug the AC power cable to an AC wall outlet.

CAUTION

Use the supplied AC cable. Do not use other AC power cables as doing so may result in fi re hazard or electrical shock.

15V/60

Battery Replacement

If you fi nd that the distance between the remote control and the main unit must be shorter in order to use the remote control , this means that the batteries are low and must be changed. Replace both batteries with new ones.

Battery N otes:

Use AA batteries.

Be sure the polarities (+, --) are correct. (See the illustra- tion inside the battery compartment).

Remove the batteries when not using the remote control for an extended period of time.

If batteries leak, dispose of them immediately. Avoid skin, clothing and any other contact with the leaked material. Clean the battery compartment thoroughly before installing new batteries.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc) with recharge- able (nickel-cadmium) batteries.

11

Image 11
Contents DTX-9909K Page Table of Contents Page Listening for a lifetime Safety Instructions Welcome Connections Contents FeaturesFeatures Excess noise Technical Specifi cationsTest condition 98.0MHz DBu Sensitivity 106.0MHz Signal noise ratio Battery Replacement About the Remote ControlConnecting the Power Cable Installing Batteries in the Remote ControlPreparing the Speaker Cable Connecting SpeakersGetting Connected Connecting to the Surround Back speaker termi- nals Connecting to the Front speaker terminalsConnecting to the Center speaker terminals Connecting to the Surround speaker terminalsGetting Connected Selecting the Correct input channel Connecting to the DTX-9909K’s InputsConnecting a DVD Player with RCA Audio and Video Outputs Choosing a Video OutputConnecting to a TV using the RCA Video yellow Output Connecting to a TV / Video Monitor using the S- Video Output Connecting a DVD Player Video using S-Video InputsGetting Connected Connecting a CD or Tape Player audio-only Matching up the Correct Video Input Connecting a Player with Digital Optical Audio Out PutsDigital Audio Options Connecting a Player with Digital Coaxial Audio Out Puts Headphone Notes Connecting MicrophonesConnecting Headphones Adjusting the Microphone VolumeDescriptions and Functions About Karaoke Mode and Music ModeDescriptions and Functions Descriptions and Functions Rear Panel Descriptions and Functions Descriptions and Functions Descriptions and Functions Remote Control Descriptions and Functions Descriptions and Functions Display Basic Functions Operating the Auto Tuner Connecting the AntennasAM/FM Tuner Operations Retrieving Preset Stations Preset StationsAutomatic Preset Storing Manually Presetting StationsAccessing the Speaker Settings Menu Speaker Settings MenuSpeaker Settings Menu Available Speaker SettingsLevel range -10dB to +10dB Adjusting Speaker Output LevelsChoices 0/0, S/0, L/0, S/S, and L/L Choices Y yes, N noneSpeaker Tone Settings Karaoke Mode Settings Menu Karaoke ModeRepeat Range 0dB -- 80dB Delay Time Range 0ms -- 250msBass Tone Range -10dB -- +10dB Treble Tone Range -10dB -- +10dBChoices L R, C, L R C, SL SR L R C, and SL SR C Reverb Volume Range 0Reverb Time Range 0 Feedback Time Range 0ms -- 80msReference Surround Sound SetupPlayback Mode Display Abbrevations and Full Working Na mes Problem Cause TroubleshootingTroubleshooting Resetting the DTX-9909K Index DelayCIN Page