VocoPro DTX-9909K owner manual Getting Connected

Page 18

Getting Connected cont.

Connecting a DVD Player Video using the Compo- nent Video Input(s)

There are Component Video (Y, Pb/Cb, Pr/Cr) inputs on 3 of the DTX-9909K’s input chan n els: DVD, AUX1 and AUX2.

NOTE: When connectin g a player to the Component Video inputs , make sure that th e player’s audio outp uts are con- nected to the same input channel. i.e. If the player is con- nected to the Y, Pb/Cb, Pr/Cr inputs on the AUX2 channel, make sure that the player’s audio is connected to AUX2 audio inputs as well.

What you will need

•Player with Component Video outputs

•Set of component video cables

1.Connect one end of each of the component video cables to the Component Video (Y, Pb/Cb, Pr/Cr) outputs on the player

2.Connect the other ends of the component video cables to one of the Y, Pb/Cb, Pr/Cr Inputs on the DTX-9909K rear panel

3.Select the proper input channel on the DTX-9909K

NOTE: 3 of the A/V input channels have Com- ponent video inputs, DVD, AUX1 and AUX2, so make sure the correct one is selected.

Selecting the correct input channel:

Front panel: Press the INPUT button on the DTX-9909K front panel until the correct input channel is displayed on the screen

Remote Control: Press the corresponding input button on the remote control to access the correct input channel. i.e. AUX1 for the AUX1 input channel, DVD/OPT1 for the DVD input channel, etc.

��

Connecting to a TV / Video Monitor using the Com- ponent Video (Y, Pb/Cb, Pr/Cr) Outputs

What you will need

•TV/ video monitor with Component Video inputs

•Component video cable

1.Connect one end of each of the Component video cables to each of the Component Video Output jacks on the DTX- 9909K rear panel

2.Connect the other ends of the Component video cables to the Component Video inputs on the TV/Video monitor

3.Make sure the TV/Video monitor is set to the correct video input. Consult the TV/Video monitor’s user manual for the necessary instructions

��

��

18

Image 18

Contents DTX-9909K Page Table of Contents Page Listening for a lifetime Safety Instructions Welcome Features FeaturesConnections Contents Technical Speciﬁ cations Test conditionExcess noise 98.0MHz DBu Sensitivity 106.0MHz Signal noise ratio Installing Batteries in the Remote Control About the Remote ControlConnecting the Power Cable Battery ReplacementConnecting Speakers Getting ConnectedPreparing the Speaker Cable Connecting to the Surround speaker terminals Connecting to the Front speaker terminalsConnecting to the Center speaker terminals Connecting to the Surround Back speaker termi- nalsGetting Connected Choosing a Video Output Connecting to the DTX-9909K’s InputsConnecting a DVD Player with RCA Audio and Video Outputs Selecting the Correct input channelConnecting to a TV using the RCA Video yellow Output Connecting a DVD Player Video using S-Video Inputs Connecting to a TV / Video Monitor using the S- Video OutputGetting Connected Connecting a CD or Tape Player audio-only Connecting a Player with Digital Optical Audio Out Puts Digital Audio OptionsMatching up the Correct Video Input Connecting a Player with Digital Coaxial Audio Out Puts Adjusting the Microphone Volume Connecting MicrophonesConnecting Headphones Headphone NotesAbout Karaoke Mode and Music Mode Descriptions and FunctionsDescriptions and Functions Descriptions and Functions Rear Panel Descriptions and Functions Descriptions and Functions Descriptions and Functions Remote Control Descriptions and Functions Descriptions and Functions Display Basic Functions Connecting the Antennas AM/FM Tuner OperationsOperating the Auto Tuner Manually Presetting Stations Preset StationsAutomatic Preset Storing Retrieving Preset StationsAvailable Speaker Settings Speaker Settings MenuSpeaker Settings Menu Accessing the Speaker Settings MenuChoices Y yes, N none Adjusting Speaker Output LevelsChoices 0/0, S/0, L/0, S/S, and L/L Level range -10dB to +10dBSpeaker Tone Settings Karaoke Mode Karaoke Mode Settings MenuTreble Tone Range -10dB -- +10dB Delay Time Range 0ms -- 250msBass Tone Range -10dB -- +10dB Repeat Range 0dB -- 80dBFeedback Time Range 0ms -- 80ms Reverb Volume Range 0Reverb Time Range 0 Choices L R, C, L R C, SL SR L R C, and SL SR CSurround Sound Setup ReferencePlayback Mode Display Abbrevations and Full Working Na mes Troubleshooting Problem CauseTroubleshooting Resetting the DTX-9909K Delay IndexCIN Page