VocoPro DTX-9909K Preset Stations, Automatic Preset Storing, Manually Presetting Stations

AM/FM Tuner Operations cont.

Preset Stations

Automatic Preset Storing

1.Make sure TUNER is selected as the input source

2.Press the TUNER AUTO button on the remote control to select AM or FM

3.Press and hold the TUNER AUTO button on the remote control for 3 seconds to begin automatic tuning

4.Radio frequencies will be scanned and stations stored automatically as A1, A2, A3, A4, A5, etc. When all avail- able radio stations are stored or if all 32 memory loca- tions are full, the auto preset will stop

Manually Presetting Stations

1.Press the TUNER AUTO button on the remote control to select AM or FM.

2.Select a radio station using the SCAN + or SCAN -- but- tons on the remote control.

3.Press the MEMORY button on the remote control. The MEMORY indicator on the display screen will begin blink- ing.

4.Press the A/B/C/D button on the remote control to cycle through the preset banks (A to D) and select one.

5.Press one of the preset station number buttons (1 -- 8) on the remote control to select a preset station number.

6.Repeat steps 2 to 5 to store other stations.

Retrieving Preset Stations

1.Press the TUNER AUTO button on the remote control to select AM or FM.

2.Press the A/B/C/D button on the remote control to select your desired preset bank.

3.Press one of the preset station number buttons (1 -- 8) on the remote control to select your desired preset sta- tion number.

TUNER AUTO button

NOTE: Weak signals can affect the Automatic Preset Storing function. Adjust the antenna for best reception and a more efficient search.

36