VocoPro DTX-9909K Adjusting Speaker Output Levels, Choices 0/0, S/0, L/0, S/S, and L/L

Page 38

Speaker Settings Menu cont.

S Speaker (Surround Left and Right Speakers)

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to select the param eter.

Choices: Large, Small, and None

Large - If you have large surround left and right speakers.

Small - Select this position if your surround left and right speakers do not have a high ability for bass reproduction. In this position, low bass signals (100 Hz) in the surround left and right channels are output from the subwoofer speaker, or from the left and right main speaker if the subwoofer setting is set to the “N (none)” position.

None - Select this position if your system does not include the surround left and right speakers. The surround left and right channels will be output from the front left and right speakers instead.

B Speaker (Back Surround Speakers)

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to select the param eter.

Choices: 0/0, S/0, L/0, S/S, and L/L

0/0 - When there are no back speakers

S/O - When there is only one small back speaker

L/0 - When there is only one large back speaker

S/S - When there are two small back speakers

L/L - When there are two large back speakers

SW Speaker (Subwoofer)

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to select the param eter.

Choices: Y (yes), N (none)

Y (Yes) - If your system includes a subwoofer.

N (None) - If your system does not include a subwoofer

Adjusting Speaker Output Levels

FL VOL (Front Left Channel level)

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the level

Level range: -10dB to +10dB

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to raise the level.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control to lower the level.

FR VOL (Front Right Channel level)

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the level

Level range: -10dB to +10dB

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to raise the level.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control to lower the level.

LB VOL (Left Back Surround Channel level)

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the level

Level range: -10dB to +10dB

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to raise the level.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control to lower the level.

RB VOL (Right Back Surround Channel level)

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the level

Level range: -10dB to +10dB

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to raise the level.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control to lower the level.

38

Image 38
Contents DTX-9909K Page Table of Contents Page Listening for a lifetime Safety Instructions Welcome Connections Contents FeaturesFeatures Excess noise Technical Specifi cationsTest condition 98.0MHz DBu Sensitivity 106.0MHz Signal noise ratio Installing Batteries in the Remote Control About the Remote ControlConnecting the Power Cable Battery ReplacementPreparing the Speaker Cable Connecting SpeakersGetting Connected Connecting to the Surround speaker terminals Connecting to the Front speaker terminalsConnecting to the Center speaker terminals Connecting to the Surround Back speaker termi- nalsGetting Connected Choosing a Video Output Connecting to the DTX-9909K’s InputsConnecting a DVD Player with RCA Audio and Video Outputs Selecting the Correct input channelConnecting to a TV using the RCA Video yellow Output Connecting a DVD Player Video using S-Video Inputs Connecting to a TV / Video Monitor using the S- Video OutputGetting Connected Connecting a CD or Tape Player audio-only Matching up the Correct Video Input Connecting a Player with Digital Optical Audio Out PutsDigital Audio Options Connecting a Player with Digital Coaxial Audio Out Puts Adjusting the Microphone Volume Connecting MicrophonesConnecting Headphones Headphone NotesAbout Karaoke Mode and Music Mode Descriptions and FunctionsDescriptions and Functions Descriptions and Functions Rear Panel Descriptions and Functions Descriptions and Functions Descriptions and Functions Remote Control Descriptions and Functions Descriptions and Functions Display Basic Functions Operating the Auto Tuner Connecting the AntennasAM/FM Tuner Operations Manually Presetting Stations Preset StationsAutomatic Preset Storing Retrieving Preset StationsAvailable Speaker Settings Speaker Settings MenuSpeaker Settings Menu Accessing the Speaker Settings MenuChoices Y yes, N none Adjusting Speaker Output LevelsChoices 0/0, S/0, L/0, S/S, and L/L Level range -10dB to +10dBSpeaker Tone Settings Karaoke Mode Karaoke Mode Settings MenuTreble Tone Range -10dB -- +10dB Delay Time Range 0ms -- 250msBass Tone Range -10dB -- +10dB Repeat Range 0dB -- 80dBFeedback Time Range 0ms -- 80ms Reverb Volume Range 0Reverb Time Range 0 Choices L R, C, L R C, SL SR L R C, and SL SR CSurround Sound Setup ReferencePlayback Mode Display Abbrevations and Full Working Na mes Troubleshooting Problem CauseTroubleshooting Resetting the DTX-9909K Delay IndexCIN Page