
Getting Connected cont.
Determining the proper way to connect the speaker cables:
The speaker cable is a pair of insulated cables running side by side. One cable is colored or shaped differently , perhaps with a stripe, groove or ridges.
1.Connect one end of the striped (grooved, ridged, etc.) cable to the “+” (red) terminal on the rear panel of the
2.Connect the other end of the striped (grooved, ridged, etc.) cable to the “+” (red) terminal on the speaker.
3.Connect one end of the “plain” (NO stripes, grooves, ridges, etc.) cable to the
4.Connect the other end of the “plain” (NO stripes, grooves, ridges, etc.) cable to the
�������������
��������������������
Connecting to the FRONT speaker terminals:
Connect a pair of
��������������������
Connecting to the CENTER speaker terminals:
Connect a
��������������������
Connecting to the SURROUND speaker terminals:
Connect a pair of DTX- 9909K following steps
��������������������
Connecting to the SURROUND BACK
speaker termi- nals:
Connect a pair of rear surround speakers to the “+” and
��������������������
13