VocoPro DTX-9909K owner manual Descriptions and Functions

Page 31

Descriptions and Functions

Remote Control

��

��

��

��

 

��

��

��

��

��

��

��

��

��

��

��

11.F. B-EX (feedback eliminator) button - In Karaoke Mode*, use this button to cycle through the 3 levels of DSP feedback eliminator or to turn it off.

12.Zone 2 Menu button - Accesses the music Bass and

Treble menus for Zone 2. Press the Zone 2 Menu button to choose either Bass2 or Treble2 and use the button on the remote to decrease the Bass or Treble and the to increase it.

13.Arrow buttons - Use the arrow buttons to adjust the various speaker settings. Use the and arrows to select which settings to adjust. Use the and buttons

to change the parameters for each settings. To open the Speaker Settings menu press either of the and ar- rows or press the MENU button.

14.Menu button - Accesses the Speaker Settings Menu. Use the arrow buttons to make changes in the Speaker Settings Menu. All of the information will appear on the display screen on the front panel.

15.Test button - Press this button to perform a channel test. The channel test sends sound to each of the speak- er outputs to test whether they are connected correctly. The display screen will show which speaker is being tested at a given time so that you can make sure the connec- tions are correct.

16.Zone2 Button - Toggles between input channel Zone 1 and input channel Zone 2.

Zone 1: Analog and digital input channels (DVD, AUX1, AUX2, AUX3, TV, AM/FM Tuner, 7.1 CH, OPT1, OPT2, COAX1, COAX2, COAX3, TAPE and CD)

Zone 2: Analog input channels (DVD, AUX1, AUX2, AUX3, TV, AM/FM Tuner, TAPE and CD)

17.Tape/COX1 input button - Toggles between the TAPE and COAX1 input channels. When the DTX-9909K is set to Zone 2, this button will only access the TAPE input channel as the digital coaxial channels are not available on Zone 2.

18.7.1 input channel button - Selects the 7.1 surround sound input channel. When the DTX-9909K is set to Zone 2, the 7.1 surround sound input channel will not be available.

1 9. TV input channel button - Selects the TV input channel.

20.CD/COX2 input channel button - Toggles between the CD and COAX2 input channels. When the DTX-9909K is set to Zone 2, this button will only access the CD input channel as the digital coaxial channels are not available on Zone 2.

21.AUX3 input channel button - Selects the AUX3 input channel.

22.DVD/OPT1 input channel button - Toggles between the DVD and OPT1 input channels. When the DTX-9909K is set to Zone 2, this button will only access the DVD input channel as the digital optical channels are not available on Zone 2.

23.AUX2/COX3 input channel button - Toggles between the AUX2 and COAX3 input channels. When the DTX- 9909K is set to Zone 2, this button will only access the TAPE input channel as the digital coaxial channels are not available on Zone 2.

24.TUNER AUTO - Selects the AM/FM tuner channel and toggles between AM and FM. Hold this button down for 1 second to begin Auto Tuning. The stations for each band (AM and FM) must be tuned before using.

25.AUX1/OPT2 input channel button - Toggles between the AUX1 and OPT1 input channels. When the DTX- 9909K is set to Zone 2, this button will only access the AUX1 input channel as the digital optical channels are not available on Zone 2.

31

Image 31
Contents DTX-9909K Page Table of Contents Page Listening for a lifetime Safety Instructions Welcome Features FeaturesConnections Contents Test condition Technical Specifi cationsExcess noise 98.0MHz DBu Sensitivity 106.0MHz Signal noise ratio Battery Replacement About the Remote ControlConnecting the Power Cable Installing Batteries in the Remote ControlGetting Connected Connecting SpeakersPreparing the Speaker Cable Connecting to the Surround Back speaker termi- nals Connecting to the Front speaker terminalsConnecting to the Center speaker terminals Connecting to the Surround speaker terminalsGetting Connected Selecting the Correct input channel Connecting to the DTX-9909K’s InputsConnecting a DVD Player with RCA Audio and Video Outputs Choosing a Video OutputConnecting to a TV using the RCA Video yellow Output Connecting to a TV / Video Monitor using the S- Video Output Connecting a DVD Player Video using S-Video InputsGetting Connected Connecting a CD or Tape Player audio-only Digital Audio Options Connecting a Player with Digital Optical Audio Out PutsMatching up the Correct Video Input Connecting a Player with Digital Coaxial Audio Out Puts Headphone Notes Connecting MicrophonesConnecting Headphones Adjusting the Microphone VolumeDescriptions and Functions About Karaoke Mode and Music ModeDescriptions and Functions Descriptions and Functions Rear Panel Descriptions and Functions Descriptions and Functions Descriptions and Functions Remote Control Descriptions and Functions Descriptions and Functions Display Basic Functions AM/FM Tuner Operations Connecting the AntennasOperating the Auto Tuner Retrieving Preset Stations Preset StationsAutomatic Preset Storing Manually Presetting StationsAccessing the Speaker Settings Menu Speaker Settings MenuSpeaker Settings Menu Available Speaker SettingsLevel range -10dB to +10dB Adjusting Speaker Output LevelsChoices 0/0, S/0, L/0, S/S, and L/L Choices Y yes, N noneSpeaker Tone Settings Karaoke Mode Settings Menu Karaoke ModeRepeat Range 0dB -- 80dB Delay Time Range 0ms -- 250msBass Tone Range -10dB -- +10dB Treble Tone Range -10dB -- +10dBChoices L R, C, L R C, SL SR L R C, and SL SR C Reverb Volume Range 0Reverb Time Range 0 Feedback Time Range 0ms -- 80msReference Surround Sound SetupPlayback Mode Display Abbrevations and Full Working Na mes Problem Cause TroubleshootingTroubleshooting Resetting the DTX-9909K Index DelayCIN Page