VocoPro DTX-9909K owner manual Bass Tone Range -10dB -- +10dB, Treble Tone Range -10dB -- +10dB

Page 41

Karaoke Mode cont.

MIC1 VOL (Microphone channel 1 volume)

Use this setting to set the maximum volume level for micro- phone channel 1. NOTE: If this is set too low, the micro- phone will not be loud enough.

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the maximum volume for microphone channel 1

Volume Range: 0 -- 80

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to raise the volume.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control to lower the volume.

MIC2 VOL (Microphone channel 2 volume)

Use this setting to set the maximum volume level for micro- phone channel 2. NOTE: If this is set too low, the micro- phone will not be loud enough.

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the maximum volume for microphone channel 2

Volume Range: 0 -- 80

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to raise the volume.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control to lower the volume.

MIC BASS (Microphone bass tone level)

Use this setting to adjust the amount of bass tone that is present in the microphone channels 1 and 2.

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the microphone bass tone level

Bass Tone Range: -10dB -- +10dB

MIC TREB (Microphone Treble tone level)

Use this setting to adjust the amount of treble that is pres- ent in the microphone channels 1 and 2.

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the microphone treble level

Treble Tone Range: -10dB -- +10dB

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to increase the treble.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control decrease the treble.

MIC DELAY (Microphone Echo/Delay Effect)

Use this setting to set the delay time for the DSP micro- phone echo effect.

NOTE: The DSP effect volume must be set loud enough in order to hear the effect

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the delay time

Delay Time Range: 0ms -- 250ms

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to increase the delay time.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control decrease the delay time.

REPEAT (Microphone Echo/Repeat Effect)

Use this setting to set the amount of repeat for the DSP microphone echo effect.

NOTE: The DSP effect volume must be set loud enough in order to hear the effect

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust repeat level

Repeat Range: 0dB -- 80dB

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to increase the bass.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control decrease the bass.

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to increase the repeat level.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control decrease the repeat level.

41

Image 41
Contents DTX-9909K Page Table of Contents Page Listening for a lifetime Safety Instructions Welcome Connections Contents FeaturesFeatures Excess noise Technical Specifi cationsTest condition 98.0MHz DBu Sensitivity 106.0MHz Signal noise ratio Connecting the Power Cable About the Remote ControlInstalling Batteries in the Remote Control Battery ReplacementPreparing the Speaker Cable Connecting SpeakersGetting Connected Connecting to the Center speaker terminals Connecting to the Front speaker terminalsConnecting to the Surround speaker terminals Connecting to the Surround Back speaker termi- nalsGetting Connected Connecting a DVD Player with RCA Audio and Video Outputs Connecting to the DTX-9909K’s InputsChoosing a Video Output Selecting the Correct input channelConnecting to a TV using the RCA Video yellow Output Connecting to a TV / Video Monitor using the S- Video Output Connecting a DVD Player Video using S-Video InputsGetting Connected Connecting a CD or Tape Player audio-only Matching up the Correct Video Input Connecting a Player with Digital Optical Audio Out PutsDigital Audio Options Connecting a Player with Digital Coaxial Audio Out Puts Connecting Headphones Connecting MicrophonesAdjusting the Microphone Volume Headphone NotesDescriptions and Functions About Karaoke Mode and Music ModeDescriptions and Functions Descriptions and Functions Rear Panel Descriptions and Functions Descriptions and Functions Descriptions and Functions Remote Control Descriptions and Functions Descriptions and Functions Display Basic Functions Operating the Auto Tuner Connecting the AntennasAM/FM Tuner Operations Automatic Preset Storing Preset StationsManually Presetting Stations Retrieving Preset StationsSpeaker Settings Menu Speaker Settings MenuAvailable Speaker Settings Accessing the Speaker Settings MenuChoices 0/0, S/0, L/0, S/S, and L/L Adjusting Speaker Output LevelsChoices Y yes, N none Level range -10dB to +10dBSpeaker Tone Settings Karaoke Mode Settings Menu Karaoke ModeBass Tone Range -10dB -- +10dB Delay Time Range 0ms -- 250msTreble Tone Range -10dB -- +10dB Repeat Range 0dB -- 80dBReverb Time Range 0 Reverb Volume Range 0Feedback Time Range 0ms -- 80ms Choices L R, C, L R C, SL SR L R C, and SL SR CReference Surround Sound SetupPlayback Mode Display Abbrevations and Full Working Na mes Problem Cause TroubleshootingTroubleshooting Resetting the DTX-9909K Index DelayCIN Page