VocoPro DTX-9909K Reverb Time Range 0, Reverb Volume Range 0, Feedback Time Range 0ms -- 80ms

Page 42

Karaoke Mode cont.

RVB TIME (Microphone DSP reverb time)

Use this setting to set the reverb time for the DSP micro- phone reverb effect.

NOTE: The DSP effect volume must be set loud enough in order to hear the effect

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the reverb time

Reverb Time Range: 0 -- 80

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to increase the reverb time.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control decrease the reverb time.

RVB VOLUME (Microphone DSP reverb volume)

This setting determines how much DSP reverb is present in the microphone signal.

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the volume for the DSP reverb effect

Reverb Volume Range: 0 -- 80

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to raise the reverb volume.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control to lower the reverb volume.

FB TIME (Reverb feedback time)

Use this setting to set the reverb feedback time for the DSP microphone reverb effect.

NOTE: The DSP effect volume must be set loud enough in order to hear the effect

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to adjust the reverb feed- back time

Feedback Time Range: 0ms -- 80ms

1.Turn the Input/Adjust knob on the front panel clock- wise or press the button on the remote control to increase the reverb feedback time.

2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the button on the remote control decrease the reverb feedback time.

OK (Karaoke output mode)

Use this setting to select which speakers will be used for microphone output.

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to cycle through the avail- able output modes

Choices: L R, C, L R C, SL SR L R C, and SL SR C

L R - Microphone output will be in the Front Left and Front Right speakers

C - Microphone output will be in the Center speaker

L R C - Microphone output will be in the Front Left, Front Right, and Center speakers

SL SR L R C - Microphone output will be in the Surround Left, Surround Right, Front Left, Front Right, and Center speakers

SL SR C - Microphone output will be in the Surround Left, Surround Right, and Center speakers

FB EX (Feedback reducer)

Use this select which Feedback Reducer setting to use

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to cycle through the avail- able Feedback Reducer settings: 1, 2, 3, and OFF

42

Image 42
Contents DTX-9909K Page Table of Contents Page Listening for a lifetime Safety Instructions Welcome Features FeaturesConnections Contents Technical Specifi cations Test conditionExcess noise 98.0MHz DBu Sensitivity 106.0MHz Signal noise ratio Installing Batteries in the Remote Control About the Remote ControlConnecting the Power Cable Battery ReplacementConnecting Speakers Getting ConnectedPreparing the Speaker Cable Connecting to the Surround speaker terminals Connecting to the Front speaker terminalsConnecting to the Center speaker terminals Connecting to the Surround Back speaker termi- nalsGetting Connected Choosing a Video Output Connecting to the DTX-9909K’s InputsConnecting a DVD Player with RCA Audio and Video Outputs Selecting the Correct input channelConnecting to a TV using the RCA Video yellow Output Connecting a DVD Player Video using S-Video Inputs Connecting to a TV / Video Monitor using the S- Video OutputGetting Connected Connecting a CD or Tape Player audio-only Connecting a Player with Digital Optical Audio Out Puts Digital Audio OptionsMatching up the Correct Video Input Connecting a Player with Digital Coaxial Audio Out Puts Adjusting the Microphone Volume Connecting MicrophonesConnecting Headphones Headphone NotesAbout Karaoke Mode and Music Mode Descriptions and FunctionsDescriptions and Functions Descriptions and Functions Rear Panel Descriptions and Functions Descriptions and Functions Descriptions and Functions Remote Control Descriptions and Functions Descriptions and Functions Display Basic Functions Connecting the Antennas AM/FM Tuner OperationsOperating the Auto Tuner Manually Presetting Stations Preset StationsAutomatic Preset Storing Retrieving Preset StationsAvailable Speaker Settings Speaker Settings MenuSpeaker Settings Menu Accessing the Speaker Settings MenuChoices Y yes, N none Adjusting Speaker Output LevelsChoices 0/0, S/0, L/0, S/S, and L/L Level range -10dB to +10dBSpeaker Tone Settings Karaoke Mode Karaoke Mode Settings MenuTreble Tone Range -10dB -- +10dB Delay Time Range 0ms -- 250msBass Tone Range -10dB -- +10dB Repeat Range 0dB -- 80dBFeedback Time Range 0ms -- 80ms Reverb Volume Range 0Reverb Time Range 0 Choices L R, C, L R C, SL SR L R C, and SL SR CSurround Sound Setup ReferencePlayback Mode Display Abbrevations and Full Working Na mes Troubleshooting Problem CauseTroubleshooting Resetting the DTX-9909K Delay IndexCIN Page