VocoPro DTX-9909K Connecting Microphones, Connecting Headphones, Adjusting the Microphone Volume

Page 22

Getting Connected cont.

Connecting Microphones

You can connect up to 2 microphones to the DTX-9909K using ¼” microphone cables.

What you will need

•2 microphones

•2 ¼” microphone cables

Connect the ¼” end of the microphone cable to one of the microphone inputs, MIC 1 or MIC 2, on the front panel.

Adjusting the Microphone Volume

Use the microphone volume controls on the front panel to adjust the volume for each microphone channel

1.Turn the control clockwise to raise the microphone volume

2.Turn the control counter clockwise to lower the microphone volume

Connecting Headphones

You can connect headphones to the DTX-9909K using headphones with a ¼” jack.

Connect the ¼” headphone cable to the headphone input jack on the DTX-9909K front panel

Headphone Notes

•Do not play the headset at a high volume. Hearing experts advise against continuous, extended play

•If you experience a ringing in your ears, reduce volume or discontinue use

•Always turn down the volume before connecting your headphones

•The speakers are turned off while the headphones plug is connected to the headphone jack

•When you connect a pair of headphones, the listening mode is set to stereo unless it is already set to 2-Ch stereo. When you disconnect the headphones, the previous listening mode will resume

•When the multi-channel input is used, only the front left and right audio can be heard in the headphones

22

Image 22

Contents DTX-9909K Page Table of Contents Page Listening for a lifetime Safety Instructions Welcome Features FeaturesConnections Contents Test condition Technical Speciﬁ cationsExcess noise 98.0MHz DBu Sensitivity 106.0MHz Signal noise ratio Installing Batteries in the Remote Control About the Remote ControlConnecting the Power Cable Battery ReplacementGetting Connected Connecting SpeakersPreparing the Speaker Cable Connecting to the Surround speaker terminals Connecting to the Front speaker terminalsConnecting to the Center speaker terminals Connecting to the Surround Back speaker termi- nalsGetting Connected Choosing a Video Output Connecting to the DTX-9909K’s InputsConnecting a DVD Player with RCA Audio and Video Outputs Selecting the Correct input channelConnecting to a TV using the RCA Video yellow Output Connecting a DVD Player Video using S-Video Inputs Connecting to a TV / Video Monitor using the S- Video OutputGetting Connected Connecting a CD or Tape Player audio-only Digital Audio Options Connecting a Player with Digital Optical Audio Out PutsMatching up the Correct Video Input Connecting a Player with Digital Coaxial Audio Out Puts Adjusting the Microphone Volume Connecting MicrophonesConnecting Headphones Headphone NotesAbout Karaoke Mode and Music Mode Descriptions and FunctionsDescriptions and Functions Descriptions and Functions Rear Panel Descriptions and Functions Descriptions and Functions Descriptions and Functions Remote Control Descriptions and Functions Descriptions and Functions Display Basic Functions AM/FM Tuner Operations Connecting the AntennasOperating the Auto Tuner Manually Presetting Stations Preset StationsAutomatic Preset Storing Retrieving Preset StationsAvailable Speaker Settings Speaker Settings MenuSpeaker Settings Menu Accessing the Speaker Settings MenuChoices Y yes, N none Adjusting Speaker Output LevelsChoices 0/0, S/0, L/0, S/S, and L/L Level range -10dB to +10dBSpeaker Tone Settings Karaoke Mode Karaoke Mode Settings MenuTreble Tone Range -10dB -- +10dB Delay Time Range 0ms -- 250msBass Tone Range -10dB -- +10dB Repeat Range 0dB -- 80dBFeedback Time Range 0ms -- 80ms Reverb Volume Range 0Reverb Time Range 0 Choices L R, C, L R C, SL SR L R C, and SL SR CSurround Sound Setup ReferencePlayback Mode Display Abbrevations and Full Working Na mes Troubleshooting Problem CauseTroubleshooting Resetting the DTX-9909K Delay IndexCIN Page