Mitsumi electronic HD8000 user manual Plugging in the power cord

Page 19

Viewing video images (continued)

Connection (for video equipment having a DVI-D terminal)

Audio cable (option)

Equipment having a DVI-D terminal

To audio output

To audio input

terminals

terminals

To DVI-D terminal

DVI cable (option)

COMPUTER/COMPONENT VIDEO DVI-D (HDCP)

For connection to the DVI-D terminal, use a commercially available DVI cable.

Some cables may not be connected correctly depending on the size and shape of their connectors.

When DVI is selected as the input source, settings of FINE SYNC., TRACKING, HOLD, etc. are unavailable.

Use AUDIO IN 1 terminal for audio input.

When you connect this projector and a digital device (such as a DVD player) via the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) terminal, black color may appear dark and deep, depending on the type of the connected device.

This depends on the black level setting of the connected device. There are 2 kinds of methods to digitally transfer image data, in which different black level settings are employed respectively. Therefore, the specifications of the signals output from DVD players differ, depending on the type of the digital data transfer method they use.

Some DVD players are provided with a function to switch the methods to output digital signals. When your DVD

player is provided with such function, set it as follows. EXPAND or ENHANCED NORMAL

See the users guide of your DVD player for details.

When your digital device does not have such function, set INPUT LEVEL to ENHANCED in the ADVANCED MENU of the IMAGE menu of this projector, or adjust the black color by viewing the image.

B. Plugging in the power cord

Plug the power cord in the same way as in the case of “Viewing computer images.” (See page 14.)

EN-19

Image 19
Contents HD8000 Compliance Notice When using the projector in EuropeContents Important safeguards Do not keep using the damaged projector Important safeguardsInserting the batteries into the remote control Checking accessoriesPreparing your projector Overview Preparating your projectorControl area Terminal board Bottom side Remote controlReception angle Using the remote controlOperational range of the remote control Using the wired remote controlScreen size and projection distance Setting up your projectorSetting up the screen When the aspect ratio of the screen isWhen projected images are distorted to a trapezoid Setting up your projectorAdjusting the projection angle When fine streaks are seen on projected imagesRear projection Front projection, ceiling mountingViewing computer images Connecting the projector to a computerFor audio output connection Plugging the power cordViewing computer images For monitor connectionRemove the lens cap Projecting imagesAV mute When connecting to a notebook computerExample of the setting procedure for external output To stop projectingConnecting to a video player, etc Connecting the projector to video equipmentViewing video images Projector + DVD player or Hdtv decoder Viewing video imagesConnection for video equipment having an Hdmi terminal Connection for video equipment having a DVI-D terminal Plugging in the power cordEN-20 With the Feature menu Volume from the speakerSetting the aspect ratio How to change the settings With the remote controlMenu operation SetupAvailable settings in the menus How to set the menusMenu operation EN-24 EN-25 EN-26 EN-27 To sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintColor Enhancer Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureYES How to adjust the computer imageLPF Progressive filter Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical positionSet the image size Advanced featuresSetting procedure Set the background colorTo enable the password function Advanced featuresPassword function To cancel the password functionTo change the input source of the left or right screen To use the split modeSplit FreezeUp button Mouse remote controlProjector + computer with USB connector OperationAbout PJLink Supervising and controlling by computerProjectorView PJLinkNormal condition IndicatorsProcedure for setting the anti-theft alarm device Terminal cover with anti-theft alarm deviceProcedure for changing batteries Replacing the lamp Interval of lamp replacementReplacing the lamp Reset of the lamp operation timeTo replace the lamp Cleaning of the lens MaintenanceCleaning of the air-filter Cleaning of the projector and the ventilation slotsFor the air-filter white Accessory air-filter unitAttaching the accessory air-filter unit Cleaning the air-filterNo image appears on the screen TroubleshootingNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution Kensington Lock Others Problem SolutionSpecifications Replacement part option/not included in the boxXGA85 SpecificationsWithout terminal cover With terminal cover ConnectorsDimension drawings unit mm Real modeMitsubishi Electric Corporation