Mitsumi electronic HD8000 Specifications, Replacement part option/not included in the box

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.

Type		LCD projector
Model		HD8000
Display technology		1.1-inch LCD panel: 3 pieces (for R,G,B)
		Pixel: 1920 x 1080 = 2073600 pixels		Total 6220800 pixels
		Active pixel rate: 99.99% or more (each panel)
Projection lens		F 1.8 - 2.1 f= 51 - 64 mm
Light-source lamp		275 W
Image size (projection		60” min. to 250” max. (projection distance 2.6 to 11.2 m)
distance)
Maximum	Computer	Maximum resolution: 1920 x 1080 dots (Compressed in the case of 1600 x 1200 dots)
resolution	signal	Panel resolution: 1920 x 1080 dots
	Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
	Component	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
	signal	Panel resolution: 1920 x 1080 dots
Computer/component video		[Signal type]	[Terminal type]		[Line]
input		Analog RGB	Mini D-SUB 15-pin		1
		Analog RGB	5 BNC		1
		Digital RGB	DVI		1
Video input		[Signal type]	[Terminal type]		[Line]
		Video input	RCA / BNC		1
		S-video input	S / 2 BNC		1
Audio input		[Signal type]	[Terminal type]		[Line]
		RGB/Component	Stereo mini jack (ø3.5)		2
		Video	RCA (L, R)		1
		S-video	RCA (L, R)		1
Monitor output		[Signal type]	[Terminal type]		[Line]
		Analog RGB	Mini D-SUB 15-pin		1
Audio output		[Signal type]	[Terminal type]		[Line]
		RGB/Component	Stereo mini jack (ø3.5)		1
Speaker		10 W Mono Round type ø4.5 cm x 1
Control terminal/others		RS-232C (D-SUB 9-pin), USB, LAN (RJ-45), REMOTE IN/OUT
Operating temperatures		+41°F (+5°C) to +104°F (+40°C)
Rated voltage		AC100 - 240 V, 50/60 Hz
Power consumption		4.4 A
Dimensions (not includeing		371 mm (W) x 207 mm (H) x 434 mm (D) (projector only)
protrusion)		443 mm (W) x 207 mm (H) x 434 mm (D) (including the terminal cover)
Weight		9.8 kg (projector only), 10.5 kg (including the terminal cover)
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
	Video input	Vp-p=1.0 V 75 Ω (negative sync)
	Component	YCBCR: Vp-p=1.0 V 75 Ω (Y) (negative sync)
	video input	Vp-p=0.7 V 75 Ω (CB, CR)
	Analog input	RGB: Vp-p=0.7 V 75 Ω (negative sync)
		YCBCR: Vp-p=1.0 V (Y) (negative sync)		Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD: TTL-level (negative or positive polarity)
	Digital input (DVI)	DVI-D interface (TMDS single link) with HDCP
	Audio input	350 mVrms, 10 kΩ or more

Replacement part (option/not included in the box)

Spare lamp: VLT-XL6600LP

Option lenses: OL-X500SZ, OL-X500LZ, OL-X500TZ, OL-X500FR(F)/OL-X500FR*

Front cabinet: CA-XL6600(FR)*

*: Use OL-X500FR and CA-XL6600(FR) in combination.

EN-46